RTX 3060 settings that pull down 35.xx MH/s

[niner]

Hi All,

I’ve spent some time looking for good settings, and some time experimenting, and found a combination I think is working pretty well. Hopefully, it can save some others some time and frustration.

RTX 3060 LHR V2, 12gb DDR6
Driver: 470.86
Hiveos 21.11.30
NiceHash Ethash
T-Rex 0.42.2,
Lhr-tune 72
Lock Core Clock: 1545
Memory Clock: 2700
Fan: 0
Power Limit: 125.

For me this pulls down 35.xx MH/s, with the occasional spike to 37.xx. the rig has been stable for 7 days. Not hardware or miner restarts.

Have fun.

[keaton_hiveon]

Use the latest trex, up core clock to around 1600 and remove power limit and increase mem as far as is stable and you should get 37-38

[niner]

Thank you the suggestion. Testing it now.

[niner]

Just as an update, I moved to a Core Clock of 1600, left the memory clock at 2700, and put the fan and power at 0. As well, I added an auto tune of 0.2 to the lhr of 74.7, with an interval of 5 minutes. It has all been stable for the last 24 hours and has settled to between 37.75 and 38.20 MH/s.

I’m anticipating this is the most I’m going to get out of this card until a full unlock is released / found.

[keaton_hiveon]

Yep, that’s as good as it gets for now.

[Goran2ip]

hello, you have Hynix memory? on asus 3060 12gb A1 is samsung memory…can’t do above 35 MH/S…

[keaton_hiveon]

are you using locked core clocks around 1600mhz?

[elonmonkey]

what is the efficiency after increasing the settings, did the additional hash power improved any efficiency or is it just a number with few more Wattage consumption. I personally don’t like to overclock too much

[niner]

I have Samsung memory, and its an EVGA card.

[niner]

I’m locked at 1600

[niner]

Efficiency is 99.78%. I don’t think I’m going to see better than that.

[keaton_hiveon]

Reduce memory if you’re getting invalids

[Goran2ip]

Also have asus 3060 12gb v2 with Samsung memory…now it is stable on 35.66 MH/s… -150/2700 120w