I made some adjustments and now I’m getting 118.6 MH.
i set -300 and i got 119mh for 2 hours. but it wasnt stable. and right now i set -310 and last 2 hours it is stable. i will let you know for the best at least for me.
1 Like
What miner are you using?
I’m using NBminer 39.2.
Did run at -310 all night with errors every hour or so.
I’m running at -320 now to test. -330 was stable.
@chbmaciel , are you stable at -300 ?
I had 2 reject shares in 9 hours.
At -300, I’m having errors of “GPU drivers, no temps”, and “Load Average > 22” every 1 or 2 hours.
my most efficient setting and stable for days is this:
GPU #1: NVIDIA RTX 3060 - 106.29 MH/s, [T:57C, P: 87W, F:95%, E:1.22MH/W], 1946/1948 R:0.1%
core 1250
memory 2530
power 101
fan 95%
nvidia driver 470.63.01
I have a rig with one 3060 (LHR ofc). I’m mining Ergo, on stock settings 102.8 mh/s @ 100w. As soon as i change Core or memory the hashrate drops to 50/60. What can i do, i have tried everything in this tread. I have driver 465.31.
i tried 460.39, but it doesn’t work. i’m using 2miners/NBminer 39.2
what to do?
Brand new to this with first rig but managed to weasel this out of my 3060 Zotac on 460.91.03
Curious if there are better to tweaks to get more out of this LHR card.
Try this settings:
Core: -300 or -310
Mem: 2700
PL: 100
Hello guys,
What do you think of these Clocks?
I spent a few hours testing each gpu and noticed that each behaves differently.
I noticed that if the temperatures increase, the rig generates a gpu temp error and restarts. I think it might be very hot memory. Now I’ve installed 120mm 1700 RPM fans and have been stable for the last 24h.
Best regards from Lisbon
Try the core between -300 and -310.
Es mucha velocidad 2700 memoria clock
It’s a lot of speed 2700 memory clock???
Can you share the miner configuration photo
Cab you share a miner configuration page photi
121.4mh
37c
65% fan
97w
1500 core
2200 mem
460.39 driver