I just started mining this week with a 3060… I didn’t know about the limiter when I bought it. Before switching to 460.39 it was getting 22MH/s and yet after trying different overclocking settings I can’t get it above 37 MH/s. What am I missing? I’m mining Eth on hiveon using lolminer.
Try miniZ
LHR? if yes which driver are you using? Thanks
Are they 3060 V1? what driver are you using? I have a 3060 v2 and a 3070 non lhr. I am looking for the best driver minnier should I use for ergo? I tryed to use trex and nbminer i got like 76mhs and 172mhs. should. I can see 125 sometime when it start then 65 -80 max
anyone have better luck?
BigTHANK’S to @ reugner For is help
I am now using Lolminer with this argument: --cclk *,1297 so my 3060 get a clock lock of 1297
Its a 3060 v2 card and the 3070 is non LHR . Before the 3060 was at 70-80mhs max
-242 2700
driver 460.39, does it works on LHR v2 ?
No, unfortunately not.
1 Like
HI, im trying to downgrade my 3060 to the 460.39 driver.
1st -is it still working?
2nd- I get invalid driver selection what am i doing wrong thanks
Just put in the number and not “nvidia-driver-update” as a prefix.
Enter the version to install: 460.39
LHR v2 ? Thanks
do you have any oc for my 3060 v2. i cant get even 110mhz for ergo. my driver is 460.91.03
Hi guys, I am new to this hole crypto mining world, still discovering a lot of things.
I have 3 RTX 3060 LHR V2 Colorful boards, that are around 103 MH with the following settings:
Core: 1580 Memory: 0 Fan: 65 PL: Not configured
All 3 have around 103 MH, is it possible to get a better result with different configuration for this board model?
One of the board is not accepting the FAN configuration, so it keeps changing during the day between 30 and 100%, and this board is gettibg really hot, around 67 to 70º C. Any idea on how to fix this issue?
I’m new to mining and HiveOS too.
Did find OC settings on another post. Getting arround 113 MH/s with the following settings. Been stable for the last 24hr:
thank you so so much. i set your settings and i get 110mh. it happened 10 min ago. but i tried different settings after that. everytinh is same only core -360 or -370. and i got 116mh. can you try, let me know?
dude dont use -360 or -370 lol. try -330.
Thanks to you now. Seems to go a bit higher at -330:
Got a GPU Temp error last night with my previous settings but mining did restart at I got pretty good result.
Let me know if your configuration is stable.
Tx
i set -300 and i got 119mh for 2 hours. but it wasnt stable. and right now i set -310 and last 2 hours it is stable. i will let you know for the best at least for me.
1 Like
What miner are you using?