Problem with OC and stable Hive OS using AMD GPUs

[Lattsche]

Hi there,
I‘m new into Hive OS and I do use 2x RX5700 and 2x RX5700xt for mining.

1. Stable HiveOS
After booting the Miner starts mining automatically - on every miner. After a while (20s / 2 Min / 30 min) the miner stops mining sporadically.

2. Freeze after applying an overclock
This problem is always the case. As soon as I try to overclock and apply the miner stops and needs a reboot. 99% of the time the OS freezes. Additionally I always see the upcoming lines as shown in the attached picture.

Is there anybody, that is able to help me with that?

Kind Regards

Mainboard: h110 pro btc+
Processor: i3-7100
RAM: DDR4 8GB

[nanial]

Check your oc settings at your cards …in maintenance mode…

[Lattsche]

Thank you! Didn’t know this, this solved my problem so far.

[nanial]

Feel free to message me… Happy mining

[UpnDownA]

This happens to me aswell. Most likely an unstable bios or your OC is too high for your Video Card. For me it runs stable and I need to stop my miner then make changes and restart the miner.

[Weaselmining]

Can you explain this a little more? I’m having the same issue with my gigabyte rx5700xt’s. Mine for 30 min and freezes. Phoenix miner reboots and then the rig freezes on reboot. I have to hard reboot it and then start the cycle again. It was super stable for weeks and the last few days have been nothing but this.

[Weaselmining]

I checked my OC settings on the card, not in maintenance mode, I don’t think, and this captures a few of the cards. I have 5 5700s and 3 570s. Running a biostar btc250 pro and 8gb ram.

[nanial]

For 5700xt core 1350 vdd 800 mem 900 vddci 850
for 570 core 1150~1200 vdd 850~900 mem 2000~2100 vddci 850~900
All above OC depents of the quality of cards… Some brands its ok same others not…

If your Phoenix miner restarts , maybe check Team red miner …

After you apply changes in rig’s restart the miner …

[CryptoMiner82]

reset oc to default even tried new templates
still no joy

[CryptoMiner82]

[Huatyap]

Hi sir how to check it’s a maintenance mode or not?

Thanks

[Donatelo]

Hello, Just saw your messages.
I actually have a problem with the installation of my HIVE OS. As you can see on the picture bellow, look what is written. I can’t keep on going to the next step and make this work.
Can you help me? Thank you for your time.
Sorry for my english, I’m french.

[nanial]

Hi,

[nanial]

Hi,
Are u running from usb stick or ssd drive?
What program u use to flash hiveos?

[Donatelo]

Hi again,

Thank you for ur fast reply.
I use and usb stick and GPU program.
And as showed on the below picture, it always freezes at this line of command, the last line on the screen.

[nanial]

Write your hiveos image again ,and use the balena etcher program for writing images ( balenaEtcher - Flash OS images to SD cards & USB drives ) or the program Rufus ( Rufus - Create bootable USB drives the easy way ) … if the problem consists PM…

[Donatelo]

Ok thank you but I already tried this manip with Bâle a and it didn’t work. No other idea ?
By the way, thank you again

[nanial]

Check your ram … if u have another stick maybe its time to use it…