I am using 7x Radeon rx470 4gb. Tried claymore and Phoenix miner on the same pool. Until today miner was working perfectly for 3years+ now I have a problem with low hash rate and stale shares.
Is the DAG getting too big already?
And i get this error: WARNING: Empty memory state, setting to max state 1
Any solutions?
The log:
Tue Sep 8 09:44:18 CEST 2020
Detected 7 AMD cards
CORE_CLOCK = 1100 1100 1100 1100 1100 1100 1100
CORE_STATE = 3 3 3 3 3 3 3
CORE_VDDC = 850 850 850 850 850 850 850
MEM_CLOCK = 1850 1890 1890 1890 1890 1880 1890
MEM_STATE =
MVDD =
VDDCI =
PL =
FAN = 90 70 70 70 70 70 70
REF = 30 30 30 30 30 30 30
=== GPU 0, 01:00.0 Radeon RX 470 4096 MB #1 === 09:44:18
TDP: 85W, TDC: 115A, Max power: 122W
WARNING: Empty memory state, setting to max state 1
All changes were already applied to Power Play table
GPU 1 Fanspeed 89% -> 90%
Successfully applied new REF settings to GPU 0.
Setting DPM core state to 3
=== GPU 1, 02:00.0 Radeon RX 470 4096 MB #2 === 09:44:18
TDP: 85W, TDC: 115A, Max power: 122W
WARNING: Empty memory state, setting to max state 1
All changes were already applied to Power Play table
GPU 2 Fanspeed 69% -> 70%
Successfully applied new REF settings to GPU 1.
Setting DPM core state to 3
=== GPU 2, 03:00.0 Radeon RX 470 4096 MB #3 === 09:44:18
TDP: 85W, TDC: 115A, Max power: 122W
WARNING: Empty memory state, setting to max state 1
All changes were already applied to Power Play table
GPU 3 Fanspeed 69% -> 70%
Successfully applied new REF settings to GPU 2.
Setting DPM core state to 3
=== GPU 3, 05:00.0 Radeon RX 470 4096 MB #4 === 09:44:18
TDP: 85W, TDC: 115A, Max power: 122W
WARNING: Empty memory state, setting to max state 1
All changes were already applied to Power Play table
GPU 4 Fanspeed 69% -> 70%
Successfully applied new REF settings to GPU 3.
Setting DPM core state to 3
=== GPU 4, 07:00.0 Radeon RX 470 4096 MB #5 === 09:44:19
TDP: 85W, TDC: 115A, Max power: 122W
WARNING: Empty memory state, setting to max state 1
Memory state 1 clock: 1750 -> 1890.
Setting core clock to 1100
Setting core voltage to 850
Setting memory voltage to 850
GPU 5 Fanspeed 19% -> 70%
Successfully applied new REF settings to GPU 4.
Setting DPM core state to 3
=== GPU 5, 08:00.0 Radeon RX 470 4096 MB #6 === 09:44:21
TDP: 85W, TDC: 115A, Max power: 122W
WARNING: Empty memory state, setting to max state 1
All changes were already applied to Power Play table
GPU 6 Fanspeed 69% -> 70%
Successfully applied new REF settings to GPU 5.
Setting DPM core state to 3
=== GPU 6, 09:00.0 Radeon RX 470 4096 MB #7 === 09:44:21
TDP: 85W, TDC: 115A, Max power: 122W
WARNING: Empty memory state, setting to max state 1
All changes were already applied to Power Play table
GPU 7 Fanspeed 69% -> 70%
Successfully applied new REF settings to GPU 6.
Setting DPM core state to 3
