MIne are not suprim… are trio and i have flash them with the suprim bios and i tested both of them under windows and there were between 99.5 to 101.5 and about the same watts like yours but in hiveos one card is hashing with 93 and the other with 83… the one that hashes with 83 i flashed back the original bios to have both scenarios to experiment but whatever i tried to make them reach 100… still no smile… so i insist both on windows 100+ both in hiveos under 90… not good
I can confirm that I also have similar problems with one of my RTX3080 cards (more specifically Asus Rog Strix OC). I have not managed to get more than 86Mh with normal indoor temp. and the following settings Core: 0, Mem: 1900 and PL 230. I’ve tried other settings, but then it gets below 86Mh. I’ve cooled the room down to 5-10C and then I can get up to 96Mh. The strange thing is that I have another 3080 in another rig in the same room, and it’s consistently giving 96Mh. It’s the Palit GeForce RTX 3080 GamingPro.
Thermal trotlin…use thermalpads in backplate…memorys very hot
i have brand new 3080 and it’s very sensible ot the outside temperature, you have to set fan at 100% anfd keep your room cool
The MSI RTX 3080 Gaming X Trio cards have thermal pads for the memory on the backplate from the factory. I was considering doing this, but then I found a teardown that showed it already had thermal pads on the backside of the memory.
Memoria: 2600
Core: 0
Fan: 80
PL: 240
en phoenix miner he tenido valores de hasta 101,5
Thanks
What don you think abaut this sentina
Core -250
Mem 2400
Fan 80
PL 230
= 98/99 MHs
Do you have a reference value of temp?
Currently my GPUs around betwen 52/58°C
I
I just verified that with the fan at 100% I get up to 212w and 89.14 mhs stable.
It really looks like a temperature problem
1 Like
Put pl 150, mem 2500
If that does not work play around with the numbers
Pl 150-170
Mem 2200-2700
Try out these combinations, i had the very same issue
Its all about fans I guess, with 40cº and fans at 50%, i have 90mhs, but with fans at 75%, 3080 starts usings 230pl and go for 100mhs
Possible thermal throttling?
I have read is not the thermal pads… but a bios issue to be flashed into the cards (at your own risk!)
Is a nest of threads: You want to go directly:
https://www.overclockersclub.com/guides/how_to_flash_rtx_bios/
If you want to read the story… and from there there is another reddit link.
I had issues for weeks and was driving me up the wall. I finally opened a remote she’ll to my rig. You type in I think driver_uodate. It auto updates nividia drivers. I then was able to get my 93mh up to 98 and my 96mh to 99. Def made a big difference and noone tells you this. It is different than updating each card I guess. Def made a world of difference now two hours no shutdown…I am confident I can get to 100 plus but want to see if it runs all night. I’m at 1060 2100 and 230. Hope this helps you as I was constantly doing restarts or down at 93 mh on some. I run 6 rtx 3080.
ok well
fan 100%
-200
2600
245 PL
my power cons is 245w my hash is 99/101
Thought some 3080s were power limited in the firmware. Remember reading some worked better after reflashing with a different firmware. Not sure if this is the cause for this.
If you you think it is thermal throttling you can try this command to see the reason
nvidia-info | grep Throttle
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.