Yep, but if something goes wrong and you only have teleconsole u re screwed, also use real address to download hive from internet
возможно использовать эту утилиту для установки хайва на чистую ubuntu server ?
ну если вы понимаете что после этого получите на выходе HiveOS
Trying to start script hive-replace in Ubuntu 18.04
hive-replace command does’t work
when trying:
./hive-replace …
it works, but the answer is:
This script does not work in the local console. Exit
Any ideas?
The best way to run this command is to use direct SSH connection (from other Linux/Mac or with Putty from Windows). ShellInABox should work. OpenVPN connection is also OK. Teleconsole connection will be closed so you will not see the progress.
No ideas.
So conceived. The script has protection from launching from the local console.
PS:
If you have physical access to the rig (to the local console) - there are many other ways to write HiveOS
I have a physical access to the rig. I tried to set root password in Ubuntu - sudo passwd root.
But result the same.
This script does not work in the local console. Exit
I m tried to connect via ssh username@myrigip from MAC computer, but result the same:
This script does not work in the local console. Exit
1 Like
the script stripes all digit in DISK_NAME and my system drive is a nvme drive with digit causing it to fail.
I found by disabling X11 forwarding on my ssh client resolved this issue.
Doubt about something strange that occurred.
I was using version 4.13.16/AMD 18.10 and it was fine.
I was curious 
to see if there was any stability/hash improvement with newer drivers (20.30) and used the replace command to update the version.
What a nonsense, 20.30 is much worse/unstable and higher consumption for Polaris (RX580).
I re-recorded a new pendrive with the good old version, but strangely there was an increase in system consumption of exactly 80W on the wall.
Not cards, they are consuming exactly the same. Only the system has increased.
Same cards, same settings, same BIOS/settings on the motherboard.
Is there any adjustment to reduce consumption of the system that I had made on the old USB stick and forgot?
Пытаюсь обновить Hive командой hive-replace -y -s, выходит ошибка unable to get url for Stable image
wget https://download.hiveos.farm/[email protected] - загрузка идет нормально. Никакой инфы по этой ошибке не нашел. Как решается, может кто подскажет?
К сожалению на данной старой сборке 4.13.16/AMD18.10 майнер claymore (ethash) работает не стабильно, можно сказать вообще не работет. Подозреваю что проблема была из-за DAG файла около 4Гб.
После обновления до 5.0.21 / AMD 20.30 проблема решена. Потребление фермы осталось прежним, при тех же настройках даунвольта и разгона памяти.
Strangely after some version updates (selfupgrade) keeping the same driver 18.30 the rig returned to its previous consumption of 1250w on the wall (10 x RX588 @ 322MHs).
I used hive-replace to the latest stable version via Teleconsole. Everything is successful and I received the last message that “Rebooting in 20 seconds” and lost connection to my rig. After that my rig didn’t come online. I didn’t find here if there are some follow up manual steps after updating hive os. Does this mean something went wrong or I just need to get physically to the rig and connect it somehow to my web account?
Я использовал hive-replace до последней стабильной версии с помощью Teleconsole. Все прошло успешно и я получил последнее сообщение “Rebooting in 20 seconds” и потерял соединение с моим ригом. После этого мой риг не вернулся онлайн в вебе. В текущем посте не было написано, что есть ещё какие-либо последующие ручные шаги после обновления hive os. Значит ли это что что-то пошло не так или же мне надо просто физически добраться до рига, подключить к нему тот же монитор и вручную как-то соединить риг с моим веб аккаунтом?
Hopefully you got it running again by now. I would say that there was something wrong and you just needed to physically reboot the system, right?
hi, i am trying to Migrate from SM*S to HiveOS Live Replacment, i trying with SSH here on a TestRig, it doesn’t work for me, Rig never comes up, anyone got this running correct?
From which version you try to migrate?
5.4.52-sm10 / amd20.30r5.6.7 / v1305
I’m having the same issue now with a TestRig.
Everything works fine except the part where it is suppose to write the farm hash to the config file. It says something is wrong with the filesystem type?
Aside from that it boots fine into HiveOS. But it is totally useless to use remotely unless it links to my account.