IM in Texas so its cooler here now, i open a window in the room. If i close the door, it heats the room, if i open the door, it helps to heat the house 
I tried that site hashrate.no and tried the setting. This is what I got. 
Yours looks much better
by the way how cold is in texas are we talking about?
Well, I tried both your suggestions… (after thermal paste was replaced)
this one gave me same result as the other but 3 degrees lower.
Thank m8 !
1 Like
Dude, lower your fan to 60, because your temp probably comes up to 60 and your Hash is REALLY nice with a bit lower energy cost. Well DONE 
If your hash drops back to 43.92, leave it at 65, if it stays up in hash, its a bit lower cost… Its worth a little bit more energy to have 4% more hash.
Thanks alot!
Technically speaking, the P102-100 is a 1080Ti. Unfortunately the OhGodAnETHlargementPill doesn’t seem to work with this graphics card. I cannot get more than 42 MH / s from the card. Does anyone have any idea what else I should try?
Try this boys
temps may seem low but this card is on accelero iv custom heatsink and fans, plus arctic silver paste
if your getting 42MH/s
100% the OhGodAnETHlargementPill is working!!! Probably just need to do some tweaking to get it to 44ish.
I was able to push it to 48.5 MHS but i lost the setting and was never able to find it again ;(
no…
it dosnt matter if i activate or disable the ethlargementpill in the overclockings setting.
Red Panda mining has a video with his results. 54.3MH/s @ 183W
mybe i can get 45 MH/s @180W but this is a way above the sweet spot
Unless somebody knows something I don’t- about the best you can hope to get right now with current difficulty on 1080ti is roughly 45 MH/s- that video of 54 MH/s Red Panda did was over 11 months ago- DAG has grown in size and complexity since then!
That’s the best I can do with msi gaming x 1080 ti. Whenever I try the settings that shared above, my miner crashes and none of my gpus working. I use 2 atx psu: corsair rm750x and Cooler Master MPE-700. I do not think it is power related problem.
Hi foks,
one more question.
All cards use the same overclock and miner (t-rex miner).
I was thinking maybe the core clock of the cards are different and this is the reason for the different hash speed. But…
GPU 0 has one of the lowest core-clock and does a better hashrate then most of the other cards.
Does anyone know the reason for the difference in hashspeed? All other cards (Vega, rx480, 3060ti and so on) do same speed at same settings. 1080Ti is the only one with his own life. 
Hi everyone. i have question. when ever i activate ETHlargement for specifically for 1080Ti then it get activated for all rest of my cards in worker. need help?
Answered my own question, to do with setting the power limiter.
Now I’ve got a couple extra hash and a huge power saving!
1 Like
Great performance!
What magic did you use?
Please tell me the secret.
1 Like
the title is asking about ohgodanethlargementpill setting/command line but no one answer and just share the clock setting…is it me only just able to read? or somebody just ignore another?
How can be possible ?