More
referral
Increase your income with Hive. Invite your friends and earn real cryptocurrency!

OC settings for AMD RX580

Приветствую всех. Подскажите это нормально:


так определяются 5 карт RX580

Добрый день а не подскажите разгон на armor 580 msi Micron MT51J256M32 пишет. а то больше 27 никак не получилось

1100 1 850 2100 is better

I use 1100 1 850 2230 on my Radeon RX 580 8192M · PowerColor Samsung K4G80325FB 113-C9403100_101 cards. 29.69 Mh each

And I use 1100 1 850 2020 or 1900 on my Radeon RX 580 4096M · ASUS Elpida EDW4032BABG 115-D009PI2-101 cards (one of them is fine at 2020, but the other starts throwing bad shares unless I’m down at 1900 - just depends on the quality of the RAM. 26.89 Mh on one and 25.54 Mh on the other.

Total on this rig, 4 cards, 112 Mh.

1 Like

how long does image filash OK??

I tried you settings
see picture

i was mining with claymore on windows 10 for 2 years at around 85-87 w per card
but in the last 2 months keeps crashing so i switched to hive os but here is 100-107w per card

1 Like

i tried different settings cannot get less than 100 w

try to change this setting

1 Like


Here’s what I’m running at. I had to flash bios for them to do it

2 Likes

Very nice results, could you share the bios settings that you used in order to achieve this watts.

Bests,

Should I tweak anymore settings for higher MH while keeping low voltage?

3 Likes

Nerheim,
Are you running the stock Bios or custom? I’m running the same cards and am only getting 26.32 MH.


the vbios is the issue flash your cards after new update

undervolt with 30 men

also go to the phoenix miner btc site
https://bitcointalk.org/index.php?topic=2647654.0

input settings of

,

Hi,
I have same card can you please share your cards OC settings and please let me know these cards or vbios moded or not. How much you are able to achieve hash in stable condition. thank you very much in advance.

1 Like

with bios flash… any sugestions

Hey :wave:, you can go upto mem 2250, check how much mem in use (like 95%) if it is less than 98 or 99 then increase MEM and set DPM to 1.

how to check mem in use ?