Which miner you are using claymore or ethminer?
You are getting rejected shares so i would decrease memory clock to 2100 to see if it gets better.
i use claymore. i try the 2100. thanks!
to be in a safe side , most rx480 cards memory is 2000
so i suggest to keep it 2000 and let it run for several hours, then increase by 50 and keep it running for several hours , till u see the best hashrate that doesn’t give errors
@Leslie
Thank you so much! i will try it!
Hi Leslie did you mod the GPU ?
Hi Peeps,
i did it, but not perfect. You have some solution?
thx,
Leslie
Добрый день а не подскажите разгон на armor 580 msi Micron MT51J256M32 пишет. а то больше 27 никак не получилось
1100 1 850 2100 is better
I use 1100 1 850 2230 on my Radeon RX 580 8192M · PowerColor Samsung K4G80325FB 113-C9403100_101 cards. 29.69 Mh each
And I use 1100 1 850 2020 or 1900 on my Radeon RX 580 4096M · ASUS Elpida EDW4032BABG 115-D009PI2-101 cards (one of them is fine at 2020, but the other starts throwing bad shares unless I’m down at 1900 - just depends on the quality of the RAM. 26.89 Mh on one and 25.54 Mh on the other.
Total on this rig, 4 cards, 112 Mh.
how long does image filash OK??
I tried you settings
see picture
i was mining with claymore on windows 10 for 2 years at around 85-87 w per card
but in the last 2 months keeps crashing so i switched to hive os but here is 100-107w per card
Very nice results, could you share the bios settings that you used in order to achieve this watts.
Bests,
Nerheim,
Are you running the stock Bios or custom? I’m running the same cards and am only getting 26.32 MH.