I really need this bios, can you help me?
Hi, I have XFX 580 8G OC+ 1386 I search a bios to go to 30/31 Mh/s. I’m 27Mh/s
please
I not found
eu te mandei no email, só não entendi o que vc perguntou la
Your overclock settings look great. What base driver (version of BIOS) are you using?
What BIOS did you start with on your MSI board?
What BIOS are you using on your RX 580?
Hi, i tried to mod bios with PBE, but i couldnt because its said it dont support the model of the Hynix memory of my cards. I have 6 RX 580 Gigabyte.
Can someone help me to mod the bios? Thanks.
Hello, can anyone send me bios for ASROCK RX580 8GB OC
? I’ve got three of them, but hash rate is about 26 MHs and consumption is 92w! Help pls.
Hola tengo el mismo problema con 4 RX 580 con memorias Samsung, podrias pasar esa BIOS, muchas gracias. [email protected]
hi my friend
Those all look great.
What miner do you use ?
dude you are gonna destroy your fans. i think you cards can run very good with 1150 core clock, 850 core voltage, 800 memory controller coltage, and around 2100 memory clock. no need of DPM states since you specify the voltages. You can also switch aggressive undervolting on and check what happens.
Buenas cómo estás? Deberías hacerlo vos el biosmod porque las memorias que tengo yo son Hynix no Samsung
Does memory voltage make any difference for RX580 since is applicable for Navi, only ?
DPM and core voltage works together and should be syncronized ? Or is enough to setup one of them ?
u can be sure that i have tried all combos and aggressive under volting is on allways on all my rigs.
So can u clarify how fans will get distroyed when running 100% every now and then?
This is during heat wave and autofan settings are set to keep quite cool core, so every now and then they run 100%. Is there some info available where it states something
about not running fans full speed? To my understang they can run full speed
for quite a bit more extended time than what im using them 100%.
i cant guess if they are Autofan or not. all i see is they are set to 90% according to your OC settings right? if you keep them on auto ok. if they run 100% for 24/7 all year, you will destroy them faster thats all. i have seen broken fans.
About the DPM states , why do you need them when you specify core clock and voltage? DPM states in the bios has the clocks fixed at some megaherz and some clocks which for memory are 1000 mvolts. when you specify the exat core clock and voltage , DPM state is ignored. Same for memory. you have 3 states 0 300Mhz 1000mvolts, 1 1000mhz, 1000mvolts, 2 2000mhz, 1000mvolts. Memory voltage is for Navi cards so you can just set the memory controller voltage, 800 is a good value there.
Your cards should be running quite good with 1500 core , 850-900 VDD, 800-850 VDDCI, 2050-2150 mem clock.