Yes I have 3 x 5700xts, they are probably my favourite card in terms of hashrate/power ratio.
Just got a 3060 today and am currently tuning it…
Tried these settings on my 3060, got 63mhs for a few minutes then crashed. So I set it back to previous settings that were stable for a while, but not hashing at all now after a couple of reboots. Do you think I could have damaged the card by pushing it like this?
The best is not hashrate but share in mining system
3070 agressif setup: 1070 | 2400 | 130
3070 safe setup: 1045 | 2200 | 130
I have better results with the memory at 2200 than at 2400 and the share / gain ratio is very low.
I prefer to play stability for information, I even mined without even overcloking and at my level I lost $ 10 / day
Are those temps safe ? What can i do to lower them? I have a big fan 24/7 on the rig but outside are 34-35C.I dont have any rejected shares but when its hot the hashrate drops like 0.5 -1 mh per rig.
Does it have invalid shares?
Hi All,
Can anyone assist with my 3060 Ti low hash rate? I’ve tried the latest drivers and 460.39 with LOL miner and it doesn’t want to go above 34 MH, yet I see everyone getting 50-60 MH. No problems with the 3090s though! I’m currently running Hiveon with Phoenix;
radeon rx 590 need vbios or not need ?
try core -500
your 3060ti is lhr
Card:
Gigabyte GeForce RTX 3060 Ti EAGLE OC 8G V2
Miner:
NBMiner 39.2
Arguments:
“lhr”: “70” (only for the cards that has LHR
Very stable with 99.9% valid share
1 Like
Cards:
Gainward GeForce RTX 3060Ti Ghost OC 8GB GDDR6
Zotac RTX 3060 Ti Gaming Twin Edge OC LHR 8GB GDDR6 x3
Gigabyte GeForce RTX 3060 Ti Gaming OC PRO 8GB GDDR6 LHR
Gigabyte GeForce RTX 3060 Ti EAGLE OC 8GB GDDR6 LHR
Miner:
NBMiner 39.2
Stable with 99% valid shares. Anything more than 1850 MEM with those zotacs and rig crashes.
2 Likes
Hi, Please I want to confirm which miner, Pool and what coin do you mine to get 60mh. I applied all the settings on nbminer and gminer as well as hiveno pool but I am still getting 32.27mh (i.e for ETC Coin). Kindly advise on how you were able to achieve your hashrate.
Thanks as I await your response
Best regards
Moses
You have LHR CARD ?
Gminer 2.66 + OC
Ccore 1070 | Mcore 2200 | PL 150
Thanks
Dear members i recently started mining with 5 Gigabyte Aorus Master 3060Ti Non Lhr GPU’s. These are my OC settings, started with 2600 on memory clock but was having lot of rejected shares and thus trying low memory now, how are these settings? do i need to tweak a bit more to get the best output? Kindly consider me as a noob. Thank you.
Try with core clock on +1425. And PL on 130 watt. This can reduce you power consumption
You mean absolute core clock? And according to the chart the max absolute core clock limit for 3060ti is 1350 so 1420 won’t do any harm? Is it ok?
Yes absolute core. 1420 is the sweet spot for the 3060ti. It is more than safe.