after applying the flight sheet settings, i got few invalid shares…dont know why
i reverted back to original, and will monitor
update hiveos,driver and more and use lastest trex 20.0.3
check your OC and network.
Stale or badshare = poor network or hight OC
Check best pool with Sonar | minerstat or GitHub - 2miners/stratum-ping: The Stratum-based mining pool performance test tool.
Is --safe_dag 2 an extra miner config? I have not gotten into all the miner configs yet, just using whatever comes stock on the miners
Trex is up to date, network is good and stable.
once i removed the settings, its running stable, no stale or bad shares.
i posted my OC settings, and again, dont know if i am doing it right, but if HiveOS is reporting the temps accurately, its running OK, no high temp and so on…and i think i am squeezing the max out of the cards at this moment…
But again, i always doubt myself, maybe i am doing something wrong…maybe i can run more efficient, or maybe thats it!
Time will tell, i will leave it as is.
And again, once i removed your settings, its running OK so far!
Thanks
yes new update hiveOS is buggy for me i have many crash ! i rollback no crash
1 Like
With new version of T-REX (0.20.3) I have error:
TREX: Can’t find nonce with device [ID=0, GPU #0], cuda exception in [synchronize, 52], CUDA_ERROR_ILLEGAL_ADDRESS, try to reduce overclock to stabilize GPU state
I know this means that I need to decrease the overclocking, but with these settings everything was fine in the old version of the miner.
Yes I have 3 x 5700xts, they are probably my favourite card in terms of hashrate/power ratio.
Just got a 3060 today and am currently tuning it…
Tried these settings on my 3060, got 63mhs for a few minutes then crashed. So I set it back to previous settings that were stable for a while, but not hashing at all now after a couple of reboots. Do you think I could have damaged the card by pushing it like this?
The best is not hashrate but share in mining system
3070 agressif setup: 1070 | 2400 | 130
3070 safe setup: 1045 | 2200 | 130
I have better results with the memory at 2200 than at 2400 and the share / gain ratio is very low.
I prefer to play stability for information, I even mined without even overcloking and at my level I lost $ 10 / day
Are those temps safe ? What can i do to lower them? I have a big fan 24/7 on the rig but outside are 34-35C.I dont have any rejected shares but when its hot the hashrate drops like 0.5 -1 mh per rig.
Does it have invalid shares?
Hi All,
Can anyone assist with my 3060 Ti low hash rate? I’ve tried the latest drivers and 460.39 with LOL miner and it doesn’t want to go above 34 MH, yet I see everyone getting 50-60 MH. No problems with the 3090s though! I’m currently running Hiveon with Phoenix;
radeon rx 590 need vbios or not need ?
try core -500
your 3060ti is lhr
Card:
Gigabyte GeForce RTX 3060 Ti EAGLE OC 8G V2
Miner:
NBMiner 39.2
Arguments:
“lhr”: “70” (only for the cards that has LHR
Very stable with 99.9% valid share
1 Like
Cards:
Gainward GeForce RTX 3060Ti Ghost OC 8GB GDDR6
Zotac RTX 3060 Ti Gaming Twin Edge OC LHR 8GB GDDR6 x3
Gigabyte GeForce RTX 3060 Ti Gaming OC PRO 8GB GDDR6 LHR
Gigabyte GeForce RTX 3060 Ti EAGLE OC 8GB GDDR6 LHR
Miner:
NBMiner 39.2
Stable with 99% valid shares. Anything more than 1850 MEM with those zotacs and rig crashes.
2 Likes