No Driver RTX 3080 12GB

[Cryptopinpin]

Yes , can you tell us how you achieved this , I cant go further than 63

[LuizLivramento]

@keaton_hiveon

nvidia-driver-update 510.39.01

put in maintenance mode restart the street rig and then run the command nvidia-driver-update 510.39.01

[LuizLivramento]

@marc91988

Which manufacturer 3080 12GB is this?

GALAX GEFORCE RTX 3080 SG LHR 12GB - GDDR6X - 384 BITS -

[LuizLivramento]

@CoolDude919

Have those values been consistent long term? Given the memory bandwidth is the same as the 3080ti, one would expect LHR rates to be around ~90mh or so, and unlocked would be around ~120mh or so, overclocked/tweaked. So ~112mh+ would seemingly be on the lower end of FHR as keaton has mentioned.

I believe it is a model with the same characteristics as the 3090 without LHR, my OC is not extreme but it has a MH variation for each board

[LuizLivramento]

@LuizLivramento

GALAX GEFORCE RTX 3080 SG LHR 12GB - GDDR6X - 384 BITS -

GALAX GEFORCE RTX 3080 SG LHR 12GB - GDDR6X - 384 BITS - Miner add TeamBlackMiner!!!

[LuizLivramento]

@Cryptopinpin

Yes , can you tell us how you achieved this , I cant go further than 63

I have OC core1400 - mem2800 and PL 300 miner TeamBlackMiner

[LuizLivramento]

I have OC core1400 - mem2800 and PL 3000 miner TeamBlackMiner

[tommy1385917]

thank you,but it seems you have a nice gpu,mine is evga 3080 12g ftw3,it doesn’t work in your way. but still appreciate.

[Jhfct]

à

Anyone has a a better Overclock ?

It’s and EVGA 3080 12 GB FTW3

[tommy1385917]

nope,i have the same as yours (card&hashrate)

[Zero]

Does lhr unlocker work? That’s non lhr hashrates. I thought all the new 12gb were lhr?

[Ernest1ca]

Try fan:100 core: 1380 mem:1550 and remove power limit.
Let me know how does perform…should be above 70mh/s.

[tommy1385917]

.

[Ernest1ca]

Maybe you need a bios flash.
Or, your ram might throttle because of overheating.
Definitely hot ram, seen from your CPU temperature.
Why are you not ramping up fan speed?

[tommy1385917]

fan is not the problem,i’ve checked on windows,i also tried +3000 mem,the ram temp is under 80.

[Ernest1ca]

Then other bios, or just playing with OC remains as solution.
For me 1550 memclock is like for you 3100.
Maybe that would be a solution?

[Jhfct]

Interesting result with lolminer

[tommy1385917]

go check your pool,not as high as you see. i’m still looking for the solution.

[ChrisRatzlaff]

I just purchased an EVGA 3080 12GB graphics card and cannot get more than 54 MH without LHR being detected. This is what I have done so far…

Updated all drivers to 510.39.01 (card could not be detected until i did this)
Used lolminer and nbminer.
Started with no clocks and then implemented changes in core clock, mem clock, and PL.
I altered core clock from -200 to 1500 (1400 is the most stable)
I altered mem clock from 1800-2800 (2500 is most stable)
and I have altered PL from 150-300.
All changes to the clocks were done in small increments.

It took me about 4 hours of work to stabilize it at 54 MH but this is awful. Does anyone have any suggestions? Is there a different driver that I should be using? Any tricks or tips?

Thanks

[tommy1385917]

don’t run with lhr mode(turn off lhr mode)