Increase your income with Hive. Invite your friends and earn real cryptocurrency!

New to mining - need advice - 5700XT

Hey Guys!

I am new to mining and i want to optimize my mining rig.

I have 3 GPUs:
0… 1x XFX RX 5700 XT
1… 1x Rog Strix RX 5700 XT
2… 1x Sapphire Nitro+ RX 5700 XT

I already flashed Bios on all cards:

→ I copied 1550Mhz VRAM Timings and to higher Mhz like 1800, 2000, 2250.
→ I changed DRAMTiming12 from 2945 to 8835 (because 8835 is 3x 2945)

MY OC look like this:

I use HiveOS - Ethermine Pool - TeamRedMiner

The system is stable but not opimal. I am looking for improvements:

  • GPU 0 uses way too much power → 144W
  • I think GPU 2 is a pretty decent gpu so it should be possible to get more than 56MH right?
  • It should be possible to get more MHs on GPU0 and GPU1 or to reduce W right?

In general:

What do i have to do to get optimal OC settings for every card? Is there anything like a guideline?

Thanks Guys!

temps are kinda high too…

What temps should I aim for?

Beside the fans from my GPUs I don’t have any additional fans in my rig. Planning to change that.

GPU2 crashed after 10 hours → i changed MEM to 915

New Test for GPU2:

changed MVDD to 1350 and MEM to 950 → crashed after 5mins
testing now: MVDD 1350 and MEM 945 → stable since 45min

Lets see :slight_smile:

These settings work for me, 5 days now. My hashrate lower than what you have but system is stable and power is reasonable.


This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.