trying to config xmrstak for monero and one i over ride config it doesnt boot this is my config anyone able to help me out
"pool_list": [
{
"pool_address": "pool.supportxmr.com:7777",
"wallet_address": "4BrL51JCc9NGQ71kWhnYoDRffsDZy7m1HUU7MRU4nUMXAHNFBEJhkTZV9HdaL4gfuNBxLPc3BeMkLGaPbF5vWtANQp8DN2o53wF9dmyf5w",
"pool_password": "Miner2",
"use_nicehash": false,
"use_tls": false,
"tls_fingerprint": "",
"pool_weight": 1,
"rig_id": "Miner2"
}
],
"currency": "monero7",
"call_timeout": 10,
"retry_time": 30,
"giveup_limit": 0,
"verbose_level": 3,
"print_motd": true,
"h_print_time": 60,
"aes_override": null,
"use_slow_memory": "warn",
"tls_secure_algo": true,
"daemon_mode": false,
"flush_stdout": false,
"output_file": "/var/log/miner/xmr-stak/xmr-stak.log",
"httpd_port": 60045,
"http_login": "",
"http_pass": "",
"prefer_ipv4": true
=== /hive/xmr-stak/amd.txt =================================================
/*
* GPU configuration. You should play around with intensity and worksize as the fastest settings will vary.
* index - GPU index number usually starts from 0
* intensity - Number of parallel GPU threads (nothing to do with CPU threads)
* worksize - Number of local GPU threads (nothing to do with CPU threads)
* affine_to_cpu - This will affine the thread to a CPU. This can make a GPU miner play along nicer with a CPU miner.
* strided_index - switch memory pattern used for the scratch pad memory
* 2 = chunked memory, chunk size is controlled by 'mem_chunk'
* required: intensity must be a multiple of worksize
* 1 or true = use 16byte contiguous memory per thread, the next memory block has offset of intensity blocks
* 0 or false = use a contiguous block of memory per thread
* mem_chunk - range 0 to 18: set the number of elements (16byte) per chunk
* this value is only used if 'strided_index' == 2
* element count is computed with the equation: 2 to the power of 'mem_chunk' e.g. 4 means a chunk of 16 elements(256byte)
* comp_mode - Compatibility enable/disable the automatic guard around compute kernel which allows
* to use a intensity which is not the multiple of the worksize.
* If you set false and the intensity is not multiple of the worksize the miner can crash:
* in this case set the intensity to a multiple of the worksize or activate comp_mode.
* "gpu_threads_conf" :
* [
* { "index" : 0, "intensity" : 1000, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : true, "mem_chunk" : 2, "comp_mode" : true },
* ],
* If you do not wish to mine with your AMD GPU(s) then use:
* "gpu_threads_conf" :
* null,
*/
"gpu_threads_conf" : [
// gpu: Ellesmere memory:3135
// compute units: 32
{ "index" : 0,
"intensity" : 1056, "worksize" : 8,
"affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
"comp_mode" : true
},
// gpu: Ellesmere memory:3135
// compute units: 32
{ "index" : 1,
"intensity" : 1056, "worksize" : 8,
"affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
"comp_mode" : true
},
// gpu: Ellesmere memory:3135
// compute units: 32
{ "index" : 2,
"intensity" : 1056, "worksize" : 8,
"affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
"comp_mode" : true
},
// gpu: Ellesmere memory:3135
// compute units: 32
{ "index" : 3,
"intensity" : 1056, "worksize" : 8,
"affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
"comp_mode" : true
},
// gpu: Ellesmere memory:3135
// compute units: 32
{ "index" : 4,
"intensity" : 1056, "worksize" : 8,
"affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
"comp_mode" : true
},
// gpu: Ellesmere memory:3135
// compute units: 32
{ "index" : 5,
"intensity" : 1056, "worksize" : 8,
"affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
"comp_mode" : true
},
],
/*
* Platform index. This will be 0 unless you have different OpenCL platform - eg. AMD and Intel.
*/
"platform_index" : 0,
=== /hive/xmr-stak/nvidia.txt =================================================
cat: /hive/xmr-stak/nvidia.txt: No such file or directory
=== /hive/xmr-stak/cpu.txt =================================================
/*
* Thread configuration for each thread. Make sure it matches the number above.
* low_power_mode - This can either be a boolean (true or false), or a number between 1 to 5. When set to true,
* this mode will double the cache usage, and double the single thread performance. It will
* consume much less power (as less cores are working), but will max out at around 80-85% of
* the maximum performance. When set to a number N greater than 1, this mode will increase the
* cache usage and single thread performance by N times.
*
* no_prefetch - Some systems can gain up to extra 5% here, but sometimes it will have no difference or make
* things slower.
*
* affine_to_cpu - This can be either false (no affinity), or the CPU core number. Note that on hyperthreading
* systems it is better to assign threads to physical cores. On Windows this usually means selecting
* even or odd numbered cpu numbers. For Linux it will be usually the lower CPU numbers, so for a 4
* physical core CPU you should select cpu numbers 0-3.
*
* On the first run the miner will look at your system and suggest a basic configuration that will work,
* you can try to tweak it from there to get the best performance.
*
* A filled out configuration should look like this:
* "cpu_threads_conf" :
* [
* { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 0 },
* { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 },
* ],
* If you do not wish to mine with your CPU(s) then use:
* "cpu_threads_conf" :
* null,
*/
"cpu_threads_conf" :
[
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 0 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 },
],