Measure power at the wall. Those software readings aren’t correct
Hello guys I am getting lower hash rates on my 3080Ti’s and looking to see how to up my hash rates.
Thank you
surely you can see that the one with the higher memory is doing the best. thats the only issue, the others memory clocks are lower so the hashrate is lower.
Hi, try using core 1110, Mem 2200 , Fan 100 and NO power limit , let us know yur results.
Have a nice day.
Hi , please open a console from hive os and run the command :
Nvidia-info , then press enter , copy and paste your results here.
Thanks.
Hi , thanks , your PNY gpu is power throttling.
IF YOUR GPUs Have 3 power inputs (3 wires / 3 power inputs) you should change your roms to EVGA FTW ULTRAs ROM.
You must choose the UNTOUCHED VERSION (NOT UNTESTED) just the evga ftw ultra OFFICIAL ROM. (Choose the newest one version of ROM)
Once replaced the rom , use core 1110 mem 2000 no power limit and fan 100%
Please come back after upgrade your roms as explained.
Show your results here …
IF YOUR CARDS HAVE 2 POWER INPUTS ONLY, NOT 3 , come here again we will find a compatible rom.
First upgrade all yours 3 power connectors cards to evga ROM
Be patient and CAREFULLY.
Upgrading roms take some time , please be patient do not disconnect power while upgrading
If you dont know how to change rom (force change) come back here.
I will wait your results, please post it here.
All my cards are 2 Power inputs except for the EVGA card. I downloaded the latest firmware on to the EVGA card and it crashes if I set my mem to 2000
Please describe your rig with motherboard cpu and power supplies
Total power you have in your config , thanks
MOBO: PRIME Z390-P ASUSTeK COMPUTER INC. (2820 01/06/2021)
CPU: 6 × Intel(R) Core™ i5-9400 CPU @ 2.90GHz
5 x 3080 Ti’s
2 1250 PSU
2 GPU’s with mobo on 1 psu.
3 GPU’s on the second.
Hive OS is reading 1360 Wh and at the wall 1500 may be
Have you tried Upgrade your MOBO BIOS ?
Also you can modify on the mobo bios PCI Express settings , in PCIe “GEN” (Generation) Set it to “auto”
on the othe hand set your mobo to “maximun performance” (no power saving , or similar things.)
disable sound and any peripherals youre not using on the mobo
Cards are mounted on Raisers ? or directly on the MOBO ?
How many cards are you feeding with a SINGLE output wire from PSU to cards ?
Thanks.
Let me know your results.
I am using 8 pin to 8 pin from psu to GPU individual. No spilt cables.
and risers I am using 8 pin to 6 pin y cables
Thanks for your Answer.
if you card with EVGA ROM, is crashing beyond 1500 mem, it is completely abnormal.
I assume you reduced your physical temperature with a fan.
Show me please a screenshot of your miner screen.
I want to know clock speeds on the miner.
Are you using NB miner ?
Let me know.
Regards.
Attached is the screenshot of the miner. I did put a fan but for the MSI card which runs a little hotter.
On device #0 set core (EMPTY = 0) Mem = 2000
Paste here again miner screen after applying changes.
( Do not forget to reboot after applying changes )
Let me know your results I wait for it.
Regards
Rig crashes after going over 1600 for the device 0.
Where can I download the untouched version of bios
Hi @HSM220 I have similar rig with exact same 3080ti MSI cards, you were able to confirm if the high power consumption reading you are getting after the rom flash are correct? I have a rig with 6 of the same gpu and if the readings are correct my PSU will crash for adding those extra 400w.
Will be great you can confirm before I proceed
thks
Hi Xcharis , Power comsuption for EVGA BIOS informed by EVGA are WRONG.
You will get about 350-390 Watts READINGS , Per card on hive OS , but this reading is WRONG.
EVGA do not inform properly power consumption.
Every card should be near 250/270 Watts REAL CONSUMPTION.
Check you power AT THE WALL BEFORE plug all your cards, go one by one, and measure power consumption at the wall, do not trust Hive OS readings.
I show you my rig rig now.
Read the power at the wall outlet, you will be draining about 250/70 Watts per GPU , NOT what HiveOS shows to you on the screen, with EVGA ROM
Let me know your results.
Regards.