when adding a final gpu 1070 to my rig, the software wont load, if i unplug the power or usb from the card eveything works fine. I have tried switching cards around and all the cards work. tried changing the riser and usb cable, and tried different usb slots on mother board but no luck.
what am i missing here?
BIOS configuration which makes that it is lost between the last card and mother board card ?
Just tell us if you succed and how. I’m interested to know. 
No luck so far, pretty sure it’s not a power issue or hardware issue. I have looked at bios but I’m not that computer savvy so can’t see any thing that stands out. Last resort is shark mining help,but they want $300 to consult.
Got it, in bios advanced settings, PEGO there is a crypto for 4 cards that needs to be enabled, that’s it! Everything works fine.
1 Like
What is your mother board model ? (this is for the case where someone report the same issue)
Motherboard is MSI B250M PRO VD
1 Like
Hi - new to forum.
Bought from Shark Mining back in Fall of 2018 - have had a lot of ups and downs since then.
Learned a lot but still have lots to learn.
Successfully transferred to HiveOS from SharkOS - but I can’t get any hash from my miner. Any tips on where to start in this forum?