Hey guys! Web site can’t load some js files on wallets page:
===================
Everybody who tested Hive 2 before release (had active rigs on testing site) got $20 deposit on Hive user’s balance.
===================
Two more bugs:
- Flight Sheets page shows the same wallet name for second coin
- Telegram’s messages delivery takes too long time. I’ve received the message that rig was booted 45 minutes later
so why do you block my autheticator? and I can not log in my farm? my rig working and mining but I lost my access to my farm on the2hiveos.farm this website doesn’t exist so my account email is still the same why my authentocor is wrong? some from support could send my priv messeg? thanks
yes of cours but i see note wrong 2fe code but I had this security on my account and worked on the2hiveos.farm so why somebody migration of my account but didn’t full account
Not sure, but form reading what you write - it looks as if you have configured your 2FA on the test site, and you haven’t been using it on the “old” HiveOS.
If that is true - then try to login without 2FA since migration has been done from old HiveOS and not from test HiveOS 2.0
ha the problem is when start use the test one I delete old one 2fa I didn’t know will back to old platform f… so how i can back to my old 2fa?
If you haven’t saved old code for setting it up - then you need to write to HiveOS support - just as in this therad:
https://forum.hiveos.farm/t/lost-2fa-due-to-new-phone/6493/3
ok but I still didn’t see email to support
thanks for you help I send email to support boy thanks again
Watchdog do not work well and all rigs at the same time of night hash rate falls down more than half
Watchdog is ON for all rigs
Stats for rig where seen same time drop
all fix when I reboot all rigs manual, than everything OK till next day 2:00 - 2:30 a.m.
What is wrong?
The Active GPU count is incorrect.
I have 8 rigs each with 8 GPUs, and 2 rigs with 6 GPUs.
That is a total of 76 GPUs.
At the moment 1 of the 8 x GPU rigs is offline.
That means that the overview screen should show:
9 active workers.
68 active GPUs (76 - 8 = 68).
8 inactive GPUs.
Instead it shows:
9 active workers - Correct
72 active GPUs - INCORRECT
8 inactive GPUs - Correct
For some reason it thinks that 72 GPUs are currently active, but actually only 68 are.
I’ve looked at the settings for each worker and the card count for each worker IS set correctly.
It knows that only 9 rigs are online, so I’m guessing that the problem here is that it is using a count of 8 cards for every rig instead of counting only 6 cards for 2 of the rigs:
10 x 8 = 80
And because 1 rig is offline, it thinks 72 GPUs are still online:
80 - 8 = 72
Something is messed up with counting of active / inactive GPUs… I am running xmr-stak with dual threaded mining. When few GPUs go offline, the count of active GPUs is redeuced correctly and count of inactive ones is increased correctly. But, when those GPUs come back online - count of active and inactive GPUs stay uncanged, and number of CPUs is increased for the number of GPUs that have come back online. I am not mining with CPUs, but dual threaded mining is represented in that way. So, when I have back online all GPUs, I am still missing them in the number of active GPUs, but number of CPUs is higher for that same number. And, also, number of inactive GPUs just keeps increasing - never comming back to 0…
And after moving to a different miner without dual threaded mining - numbers are correct. At least - they were until Worker API Balancer went offline and whole hell broke loose 
добрый день! Не могу получить код подтверждения! Что делать?
НЕ получается Начать чат с этим ботом. t.me/hiveosbot Бот ответит вам, и вы увидите свой КОД, который вы должны ввести в поле справа. Что-то вроде ‘12345’.
Hey! I have a proposal. Sometimes I’m getting “claymore low hashrate” error and the value is lower on 1xGPU hashrate value. But there is no any information about which gpu is went down. So, it would be great to add information about current hashrate for all gpus to detect the failed one.
1 Like
My major critique with Hive2.0 vs old Hive is that the algorithm does not change right away when miner switches.
If you guys could please make that happen- It will be great. I have users switching to hive using my profit switching miner under development, and hopefully giving you some great business, some of them with hundreds of gpus and very large setups and are done with windows. The problem is, is that the HiveOS algo doesn’t switch when miner switches, even though “algo” api parameter is being changed.
Everything else works.
It seems like it eventually changes- It just takes up to 10 minutes to do so…But when your miner changes every 5 minutes- You get no algorithm stats.
It was working fine in Hive 1.0
1 Like
How do I delete a farm? I accidentally added another one that I will not use.