Hi,
I just got my first 3070. It’s a gainward phantom.
Updated my rig to lastest HiveOS, and latest nvidea drivers
5.4.80-hiveos · H 0.6-210 · N 470.74 · up 6 minutes 24 seconds
Miner · ID XXX · LA 0.34 0.20 0.09 · RAM 3.8G available 2.6G (68%)
sda4 total 15G used 4.7G free 9.4G (66%) · TOSHIBA TransMemory 14.5G
eth0 routable ip 192.168.1.38 gw 192.168.1.1 dns 8.8.8.8 8.8.4.4 · alx
0 01:00.0 GeForce GTX 1070 8119 MB (86.04.50.40.0A) 58°C 53 % 99 W
1 02:00.0 GeForce RTX 3070 7982 MB (94.04.46.00.D1) 38°C 30 % 124 W
2 05:00.0 GeForce GTX 1070 8119 MB (86.04.50.40.4A) 56°C 39 % 101 W
Flightsheet: “Nano T rex” · t-rex 0.23.1
If I leave default values on my 3070 I get around 27 MH/s.
Using many different settings I found in the forum I manage to go up to 33 MH/s, but this card is suposed to get me up to 60 MH/s
Right now using CORE -600 MEM 2800 PL 125 I get 33 MH/s which is the ax I’ve gotten out of it.
Here’s info about the card
=== GPU 1, 02:00.0 GeForce RTX 3070 7982 MB ===
Bios 94.04.46.00.D1, PCIE Link Gen 3, PCIE Link Width 1x
S/N -, UUID GPU-388d95ba-9480-5d11-2137-ca31f0684499
Power Limit: Min 100.0 W, Default 290.0 W, Max 330.0 W, Current 125.0 W
Frequency: GFXCore 1245 MHz, MEMCore 8200 MHz
Memory: Total 7982 MB, Used 4731 MB, Free 3250 MB, Samsung GDDR6
Utilization: GPU 100 %, MEM 65 %
PSTATE P2, PWR 124.6 W, Temp 38 °C, Fan 30 %, RPM 1299 (30 %), RPM 1304 (30 %)
As said I have tried many configurations with similar results. None going higher than 33 MH/s.
I have tried different ports on the motherboard
I have tried turning off all the other cards and leaving just the 3070
I have tried with different power cables
I have search for this specific card on the internet, and I don’t find anything in particular that’s wrong with the card.
This card is LHR, but if I understand correctly with nvidia 470 driver it shouldn’t be an issue, right?
Anyone has any idea what could be wrong?