Hi I am new to HiveOs I transfer from windows can anyone help me with the below Error
I tried bios reset,
Re-install new HiveOs,
OC after a few hours to stable that data file,
Change Rizer,
but the same error once the rig start gives the below error and then Hang
GCVM_L2_PROTECTION_FAULT_STATUS:0XFFFFFFFF
Faulty UTCL2 client ID unknown (0x1ff)
MORE FAULT TS: 0x1
WALKER_ERROR: 0X7
PERMISSION_FAULT TS: 0XF
MAPPING_ERROR: 0X1
RW: 0X1
Seems an oc error to me.
Try to use less aggressive overclock settings, may you post here yours?
Try to run the Fligthsheet with no over clocks and see if that is stable.
What GPUs are you running?
Problem Solve
I tried many times to change OC, 2 times do reinstall Hiveos and run for hours then change Oc.
Thank you for all, especially for albyG and Rashikki
Lucky I have more experience in Hardware than Hiveos I tried all possible ways but nothing works. Finally, I find out that one GPU Amd RX6800 out of 8gpu got a problem once I remove that, now all ok no problem at all. the one card which gives the problem has already been sent for a warranty.
