I live in Portugal where light consumption is even more expensive! 
It seems to have a good consumption benefit. You are going in a good way. 
2 Likes
I don’t know, I’m waiting for an answer from a specialized person and I’m also researching! But there are always two advantages…the first is the power consumption and the second is a lower temperature and lower fan speed, which helps the GPU’s durability and sometimes increases the speed efficiency a little!
Are you using GMiner version 2.68? Is that so far the only complaint I see is the instability of energy consumption! But even so you can use the PL (of course this will lower the MH/s).
mi usb esta loco no me deja instalar controladores nvidia error 128 y no mina ergo solo eth aunque la plantilla de vuelo sea ergo alguna solución la mia es formatear usb empezar de nuevo un saludo gracias por todo
meu usb é louco, ele não me deixa instalar drivers nvidia erro 128 e nenhum meu ergo apenas eth mesmo que o modelo de vôo seja ergo alguma solução minha é formatar usb começar de novo ola obrigado por tudo
my usb is crazy it won’t let me install drivers nvidia error 128 and no mine ergo only eth even though the flight template is ergo some solution mine is to format usb start over hello thanks for everything
I had a similar problem installing drivers from other GPUS! But I decided using the following codes in the kernel
1st “apt update” and 2nd “nvidia-driver-update”
Ok, I’ll try, I’ll tell you about the results, thanks for your help
1 Like
@all And by the way, to leave a word of relief to all people who are afraid of large variations in consumption… from my research and from what I have said so far with other people, there is probably no problem with energy variation, because this variation indicates that there is room for further calculations, which does not seem to correspond to the clock drop…(which is normal as the GPUS LHR still only has 70% unlocked)
So I THINK, just my conclusion…it might be a method to trick the LHR and thus bypass the blockade!
If anyone has anything else or other information on this subject… share with us please! Thanks
1 Like
Hi, I’m not using Gminer, i’m using MiniZ
Try using Gminer or NBminer! Any of them will give you more MH/s, just say with Gminer you get better consumption, temperature and smaller feeds!
Hello
Still 26mhs on a ASUS GeForce RTX 3060 12 GB in gminer2.68 any sugestions ?
without any Extra config arguments
In MiniZ 1.8y4 i reach 33mhs
with --mode=80
Thx
Is it a 3060 LHR1 or LHR2?
I unfortunately do not have a LHR2 card yet to test with, but i would suggest hooking the psu up to a killOwhatt meter and check the actual wattage draw from wall, i believe that its not fluctuating the actual power draw but rather the ‘reported reading’ to fool the LHR mechanism imo.
Would like to get my hands on one tho and test.
Thank you!
I checked from the wall, its fluctuating 830W-1050W my whole rigg, on NB Miner constant 1050W.
What are your settings in Hive for CC, Mem, and power?
Can I have your settings? Thanks
hola, consulta y que drive tenes?
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.