Hey, I wanted to share a just one insight into my setup. I’ve gotten no where. But I’ve come across the easiest way to overclock to perfections.
First off, I utilize a Crypto Hashing Processor or CMP. one of the first was my P104-100’s Took me the longest to set right. Well, it was because i didn’t understand them. They don’t use CUDA, locked FULL bandwidth at 4GB and someo likes to mod it to 8GB. hehe. they are not a GPU by the farthest stretch of imagination. They are not a consumer product. they are a business Hashing unit. That’s why i like them. All the GPU’s now adays have low hash rate locks because of CMP’s
So i took it upon myself to learn how these work.
I can tell you right now this has only been done on CMP’s
Run these numbers through your calculator
the P104-100 for instance.
base core clock is 1607MHz
Boost is 1773MHz
Max is 2000MHz
Min is 1440MHz
Power limit is 50% up to 120% ~ 90 Watts to 230 Watts
ok so here’s what I do to get the best overall hash rates
for the sake of my math
punch into the calculator
MIN 1440 MHz divided by 4. = 360 mhz
360 MHz times 50% = 180 mhz
180 MHz times by 1% = 1.8 mhz multiplier
1.8 times 50 Min power limit = 90 watts
so at 50% power limit i run 90 Watts
so if i put in 1.8 times 65% i run at 117 Watts
Here’s at the highest core clocks
MAX 2000MHz divided 4 = 500
500 times 0.5 = 250
250 times 0.01 = 2.5
2.5 times 50 = 125 Watts
Works every time!
i run 125 watts or i run 117 watts but i choose 108 watts because that’s the base boost.