Am I doing something wrong??
I’m seeing 105h/s @ 19W
03-02-2023 18:44:36 [GPU 0] 6740593745 STEPS (+108958403) | 241.00s | FLOPS = 452 kFLOPS | HR = 105.015 H | AVG(O)n ^ 1.20746 | CIRCUIT SIMULATION (1.09h)
Yep, knew it was too good to be true 
[GPU 0] 7285556563 STEPS (+107637195) | 240.19s | FLOPS = 448 kFLOPS | HR = 20.390 H | AVG(O)n ^ 1.21378 | CIRCUIT SIMULATION (1.44h)
Well, I’ve done everything what they said with the flight sheet specially, all the configurations, actually they say it only works in Nvidia GPUs, I have my 1660 Super but ones I do all the configutations, the flight sheet runs but I can’t see the GPUs in the farm section and when I check the my DNX address wallet it says not found but I know it is not the wallet address or something like that, it is because something with the flight sheet configitation is not good for the 1660 Super and I don’t know what is it. Do you know somebody else is having the same situation with the 1660 Super?
This is the configuration I’ve seen for Ekapool
dynexsolve
https://github.com/dynexcoin/Dynex/releases/download/DynexSolve/dynexsolve2.3a_hiveOS.tar.gz
_dnx.us.ekapool.com:19666
-no-cpu -multi-gpu -sync -mallob-endpoint https://dnx.sg.ekapool.com
Are you using an exchange address or dedicated wallet?
I am using dnx wallet
looks good 
Maybe try a different pool. I tried it with only one card, so it is a little different
Have you tried to look in the terminal at the miner as it starts? Usually it will tell you what it doesn’t like.
I did everything man, nothing works.
lol, good going. Thought of getting a k80, but was concerned not being supported by newer drivers
Keaton
If an exchange address is used, should I append the paymentID using the “+” after the address?
Don’t mine to an exchange, I don’t believe it’s supported anymore anyway.
their wallet is a bit of a pain. The prebuilt binaries don’t work. You should be able to compile it for your computer.
As keaton said DON’T USE EXCHANGES. Not too keen on their online nor mobile wallets either.
Hey I was just wondering, dynex is super big on vram right? what if you get a workstation card that has 24gb of vram or more. does that work for dnx? (I know pretty much nothing about dynex)
Got it!
Thank you
Are you sure you’re using a correct wallet address?
I had problem like that.
Using %WORKER_NAME% as pass the problem was solved
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.
