Dynex display error

[painting]

Seems that dnx works too slowly for hive to be happy with it. It shows the hashrate about once a minute, and if you are lucky finds a share every few minutes

However, both the pool and miner are chugging along

05-02-2023 15:11:50 [INFO] POOL HASHRATE 101 (994/17) UPTIME 68278
05-02-2023 15:11:51 [MALLOB] ATOMIC STATE UPDATED
05-02-2023 15:11:56 [STRATUM] SUBMITTING PoW: 7b6854f6181e7f1d2b27a851c27cf5a48e5b9c70fc3cab5f9618afe72c0e0100 NONCE 845a72dd DIFF 62098
05-02-2023 15:11:57 [STRATUM] SHARE ACCEPTED BY POOL (995/17)
05-02-2023 15:12:02 [STRATUM] UPDATED
05-02-2023 15:12:54 [GPU 0] 143245954284 STEPS (+144793222) | 61.68s | FLOPS = 2347 kFLOPS | HR = 101.933 H | AVG(O)n ^ 1.45591 | CIRCUIT SIMULATION (18.98h)
05-02-2023 15:12:54 [INFO] POOL HASHRATE 101 (995/17) UPTIME 68342
05-02-2023 15:12:57 [MALLOB] ATOMIC STATE UPDATED
05-02-2023 15:13:07 [STRATUM] UPDATED
05-02-2023 15:13:59 [GPU 0] 143390241129 STEPS (+144286845) | 61.16s | FLOPS = 2359 kFLOPS | HR = 101.933 H | AVG(O)n ^ 1.45599 | CIRCUIT SIMULATION (19.00h)
05-02-2023 15:13:59 [INFO] POOL HASHRATE 101 (995/17) UPTIME 68408
05-02-2023 15:14:02 [MALLOB] ATOMIC STATE UPDATED
05-02-2023 15:14:12 [STRATUM] UPDATED
05-02-2023 15:15:04 [GPU 0] 143535562508 STEPS (+145321379) | 61.00s | FLOPS = 2382 kFLOPS | HR = 101.933 H | AVG(O)n ^ 1.45607 | CIRCUIT SIMULATION (19.02h)
05-02-2023 15:15:04 [INFO] POOL HASHRATE 101 (995/17) UPTIME 68473
05-02-2023 15:15:07 [MALLOB] ATOMIC STATE UPDATED
05-02-2023 15:15:17 [STRATUM] UPDATED
05-02-2023 15:16:09 [GPU 0] 143681406086 STEPS (+145843578) | 61.46s | FLOPS = 2373 kFLOPS | HR = 101.933 H | AVG(O)n ^ 1.45616 | CIRCUIT SIMULATION (19.04h)
05-02-2023 15:16:09 [INFO] POOL HASHRATE 101 (995/17) UPTIME 68538
05-02-2023 15:16:11 [MALLOB] ATOMIC STATE UPDATED
05-02-2023 15:16:11 [STRATUM] JOB ID 600690781904872 DIFF 5397
05-02-2023 15:16:14 [STRATUM] SUBMITTING PoW: 56a135faa3990ce5d4acf4c1a8df9c279cceb88b117a14696017bc8acacc0800 NONCE b7bb72dd DIFF 7447
05-02-2023 15:16:14 [STRATUM] SHARE ACCEPTED BY POOL (996/17)
05-02-2023 15:16:22 [STRATUM] UPDATED

[keaton_hiveon]

All of mine show as they should even ones with single cards/low hashrate. Can you post a screenshot of the full worker overview page? And of your flight sheet? Curious what versions you’re on and config you have set. Maybe something is causing an issue.

[painting]

This took several hours to happen (7-8?). Everything else is working fine. I left it overnight and though hive showed nothing, it was mining fine. The pool showed no gaps.

I had a low memory clock using nvtool from the dashboard

nvtool -i 2 --setclocks 2101 --setcoreoffset 225 --setmem 810 --setpl 170

Just upgraded gminer and it is showing correctly again

[qfedesq]

Hello, does anybody know why it shows 223.0 H even though I have 8 x 3060 with 103 H each?

[keaton_hiveon]

Dynex requires a modern cpu with aes instruction sets for larger rigs to get full hashrate

[painting]

you also need enough cores. You will be limited to a certeain hr depending on your cpu. Check the hr on the pool

[Farmingfarmer]

Is dynex pretty much just about vram? (just wondering if old cards with 8gb of vram make sense now)