OS
Pool
ASIC Firmware
ASIC Hub
More
blog
Blog
News and Articles
forum
Forum
Top discussions, announcements, help
Show all articles
Referral Program
referral
Increase your income with Hive. Invite your friends and earn real cryptocurrency!
Get your referral link

Dual Mining TON+ETH

Miners
, ,
#16

The only way I’ve heard to see stats and balance like that is using Telegram on Whaletonpool and the Ton bot will provide the info. There are setup instructions in the TON mining setup thread. Once you download and setup Telegram then these are the commands to check mining info while dual mining.

Telegram Tonbot
Telegram Tonbot1125×1508 208 KB

[quote=“Lamar249, post:4, topic:70385, full:true”]
Also does anyone know how to check my TON miner status like you do for ETH on ethermine.org.

[/quote] You have to register your wallet adress at Telegram with the Bot

#17

Thanks, I had already figured it out.

#18

Okay, I’ve never really tried to do this myself so wish me luck lol. What was your process for finding VDD/VDDIC/MVDD settings?

#19

RX 580 30mh/s ETH / 500 MH/S TON
RX 590 29.30 mh/s ETH / 490 MH/S TON
3060v1 47 mh/s ETH / 750 mh/s TON

Anyone with similar cards can post his numbers?

#20

Trial and error. The goal is to minimize power draw while maximizing hashrate

#21

Yeah I messed around a little but my LA keeps going up randomly and causing the miner to re start

image
image1443×510 71.3 KB

#22

Use the core clock to limit power draw, not the power limit.

#23

Okay, I will try that. Is there a reason why not to use PL?

#24

I reverted those settings my watts went over 200 for some reason but before without PL it was sitting at 165 idk what happened.

#25

image
image1418×397 55.6 KB

#26

You can and should use the power limit as a failsafe, but limiting the power will just pull core clock down to meet your power draw, so you have your core clock set to 1800, but with that power limit it’s probably throttling a good bit. It’s kind of counter intuitive to raise the core just to throttle it down with a power limit vs lowering the core to begin with.

#27

Yea, I figured that but posted a reply anyway for the next person that hasn’t yet. Doing my part for the community and all…

#28

Thanks man

#29

image
lowered the core to 1700 and started getting this.

#30

You have to restart the miner after changing core clocks

#31

I gave up some how my watts went up by 20 with the original settings I had. lol

#32

It’s better to start low and work your way up, then you can watch the power draw slowly go up until you get a setting you’re happy with.

#33

Any better pools than ton whales?

#34

Im trying to change TON servers (dual mining) from whales to ton-pool… after applying the pool change. When I click on Update I get an error telling me my Algo2 (TONDUAL) is invalid. What algo do I change it to to keep dual mining and how/where do I change the algo?

#35

Make the change, then go to miner config and make sure the algo is still selected for the second coin.