Hello all, I recently updated Nvidia drivers on my rig and OC settings are not working. I reinstalled Nvidia settings, but no luck in over clocking. I also uninstalled and purged drivers and settings and reinstalled the drivers using nvidia-driver-update command. Still cannot over clock. I get the following errors when I try to apply the overclock. Could someone help me here?
33s - Nvidia settings applied
Sun Mar 1 11:10:51 PST 2020
Detected 2 NVIDIA cards
CORE = 100 100
MEM = 1700 1700
PLIMIT = 135 75
FAN = 79 70
FANCNT = 1 1
=== GPU 0, 0d:00.0 P104-100 4042 MiB, PL: 90 W, 180 W, 217 W === 11:10:51
Power limit for GPU 00000000:0D:00.0 was set to 135.00 W from 130.00 W.
All done.
ERROR: Error assigning value 1700 to attribute
‘GPUMemoryTransferRateOffset’ (rig1831bf263986:0[gpu:0]) as
specified in assignment
‘[gpu:0]/GPUMemoryTransferRateOffset[1]=1700’ (Unknown Error).
Attribute ‘GPUPowerMizerMode’ (rig1831bf263986:0[gpu:0]) assigned value
1.
Attribute ‘GPUFanControlState’ (rig1831bf263986:0[gpu:0]) assigned value
1.
Attribute ‘GPUTargetFanSpeed’ (rig1831bf263986:0[fan:0]) assigned value
79.
The valid values for ‘GPUGraphicsClockOffset’ are in the range -200 -
1200 (inclusive).
‘GPUGraphicsClockOffset’ can use the following target types: X Screen,
GPU.
=== GPU 1, 0e:00.0 GeForce GTX 1060 6GB 6075 MiB, PL: 60 W, 120 W, 140 W === 11:10:51
Power limit for GPU 00000000:0E:00.0 was set to 75.00 W from 75.00 W.
All done.
Attribute ‘GPUPowerMizerMode’ (rig1831bf263986:0[gpu:1]) assigned value
1.
Attribute ‘GPUFanControlState’ (rig1831bf263986:0[gpu:1]) assigned value
1.
Attribute ‘GPUTargetFanSpeed’ (rig1831bf263986:0[fan:1]) assigned value
70.