Will “what” work?
If you want stability, you need to figure out why it’s unstable.
I think you should open a new thread and put your entire rig configuration in it.
We don’t know anything about your rig except that you have 4 R9 390s
Will “what” work?
If you want stability, you need to figure out why it’s unstable.
I think you should open a new thread and put your entire rig configuration in it.
We don’t know anything about your rig except that you have 4 R9 390s
I apologize for any issue I might have caused by posting here. I did start my own thread about the error I was getting with the run down of my system. However, I will give you a run down of my system.
CPU: i5 4590
MB: ASrock H81 pro R2.0
RAM: 8gb 1600
GPU: 4 R9 390
SSD: 128gb
PSU: 2 850w 80+ gold Rosewill
The error that I keep getting is GPU drivers not detected, no temps
The script has been updated to include the new drivers also
are there any plans to update to 20.04 and beyond?
AMD drivers are in version 21-40-1 maybe they have improvements …
Hi. I would like to ask how did you connect this vent to the graphics card. I have an adapter and the same vent, but the only way I figured out is to connect at max rpm to a molex 12V. I cannot master the possibility of controlling its rotation.
Is there one board connecting the son of a grapple card to this vent?
I read what you wrote about the drivers.
Do I understand correctly that you need to install amd-gpu-pro drivers?
Thank you for applying to your advice.
was going to use this to update past what my rigs currently have, but the latest option on the list when i run it is what i’ve got. is there a way to get a version past 20.40 or is it even worth messin with?
most of my amd gpu’s are rx580’s and a few rx5700xt’s…and one v56.
It seems like the script is not up to date, I wanted to uninstall latest AMD drivers in the stable version but uninstall script is missing
I upgrade the Hive OS by
Then use the three script lines, and end up with the below error, please support
E: Unable to correct problems, you have held broken packages.
dpkg-query: no packages found matching amdgpu-pro
Try amd-ocl-install instead, this method is quite dated now.
where I can find amd-ocl-instali?
It’s built in, make sure you’re on the latest stable image for best results
Install not instali
I can’t read anything in that screenshot.
What’s the miner say?
Now card is mining, however it getting hot immediately once started and reach to 72C is it normal or want to setting it?
Set clocks and voltages and turn the fan speed up if needed
can you guide me as am new in that subject