5.4.0 works fine, when I update hive pretty much any version after 0-6.203 causes the card to not mine with the same settings for long, as mentioned (10-15min before the card will crash and rig reboot)
When I’ve asked in the HiveOS discord they said its my settings but I swear its either the amd driver or something because when I update there is issues, when I rollback there isn’t a problem.
did you try 5.10.0 kernel?
worth noting, im running 8 5700/xts on latest everything, no issues, and i manage a 70 card 5700 farm as well with no issues on latest. id imagine its a local to you issue as well.
Yeah but is there a way to update only just the kernel??
the base image/kernel are separate from software versions
I’ve updated the kernel but it’s updated the amd / nvidia drivers as well. How do you do that??
amd drivers will be tied to the image/kernel. you can choose the software version using the upgrade/downgrade feature.
I’ve done that plenty of times. Yes I get the problem when I upgrade the kernel/hive version beyond 0-6.203
so let me see if i follow,
old kernel/old version works with your settings.
old kernel/new version doesnt work.
new kernel/old version doesnt work?
new/new doesnt work?
How do you get new kernel/old version? AFAIK you could only be on the old version/kernel and new version/kernel
flash the latest stable then choose the software version. like i said theyre seperate.
When I downgrade it changes the kernel as well. That’s why I am confused.
kernel only changes with a reflash.
So what is the method to update kernel only?
^this
Ok thanks will test later.
I have been running a 10* 5700 rig for a year and cannot go past 0.6-203. Sometimes it stays up for a week, sometimes only a day, but that is good enough for me considering the BIOS mods.
With Samsung memory I can’t go over 900, but on the plus side power usage is way lower, so it is very efficient.
With Micron memory it can go up to 940 but power usage is much higher, to the point of being inefficient.
start with a fresh latest stable image and tune oc from there from scratch
try 5.10.83 with AMD 20.40 that doesn’t have memory leak like 20.30 … And check your memory Samsung 885 Micron 900-930
I have given up at this point with anything above 203, ive been tuning like a madman and still i get gpu dead errors and invalid shares, i have tried all solutions suggested also, nothing worked including new kernel and drivers, so here i am back on 203 now and everything is running super smooth and stable again.
so yes i dont know whats up with above 203 and 5700s but you are not alone, hopefully one day this will be resolved and then i can reliably dual mine some ton also but until then i guess we are stuck with 203
what clocks and voltages are you running? can you post a screenshot of your worker overview screen?
