Asus Prime Z590 black screen after HiveOS boot

[maras]

So it seems that the only way to connect a local monitor is via a PCIE GPU. Or maybe there will be fix in HiveOS/Linux distro

[aliqet]

hi dude,donnt toss rigs,just stable running,donnt warried about some problem,the rigs just lie down there so quietly to earn dolar for you.
U just forgot that problem,some little trouble maybe make big trouble.

[maras]

Of course, I understand what you mean
But in principle I am annoyed that it is not possible

[aliqet]

Right，that is unacceptable.

[easy2supply]

Try to use Gpu hdmi slot , I am not same when I using the onboard graphic

Iam using z590 d gigabyte

[maras]

GPU (in PCIE slot) HDMI port is working. But onboard GPU has no output singal. Even if its set onboard GPU to default in BIOS.

[easy2supply]

so just use the gpu hdmi port if you need to, but you can remote access anyway

[AlexInca]

@maras I have the same issue and not able to find a motherboard setting to fix this. I tried setting PCIe Gen1 Gen2 and Gen3 but no joy. I also have another issue: I can only get 1 GPU to register. First GPU is a RTX3070LHR in main PCIe slot and I tried adding a second GPU (Zotac 3070). First GPU registers but second doesn’t show in dashboard. I also unsuccessfully tried a third GPU using a riser in 5th slot with same result. What motherboard settings are you using for multiple GPUs?

[maras]

I have 6x 6700XT cards and everything works fine but vidoe output only on PCIe GPU. Its only insignificant problem.
I set BIOS like usual, nothing special (Gen2, 4G enable, disable audio and serial, disable cpu virtualizaton atc.).
For next few RIGs I try buy MSI Z490-A PRO and with M2 reduction I have 6 GPUs mining and even with internal GPU. So from now for next RIGs Im staying with this MOBO.
Even BIOS settings is much simplier for mining than with ASUS

[igotek]

I have thse problem. Anyone found any solution for CPU Graphics ?

[MylesDyson]

I encountered the black screen after the boot selection on the Asus Prime Z590 as well. It seems to have an issue with the onboard graphics chipset. My work around was to patch in through one of my graphics cards. Then perform wifi setup. It is display only because the system is booting normally in the background.

[tisoloteam]

Guys,

Any ideas how to make Motherboard HDMI operational ?

[maras]

Unfortunately, no. I bought batch of Asus Z390 a MSI Z490 boards and start using them instead of Z590 boards.

[tisoloteam]

By the way, what I did I calmed down and reinstalled the whole rig (due to another issues but not because of HDMI) adding cards one by one.
Once I add the 1st card I connected a monitor to its HDMI. It is working okay.

Nothing new with it, but next time I will not spend time on solving “cosmetic” issues with the rig.

[Arsen1347]

Hello, could you reset all the BIOS settings for the z590?

[Righive]

Any fix for that issue? Black screen on me too

[Doltor]

The problem is the CPU we are most likely using…HDMI and Display Port are only supported with 11th generation Intel CPU and above…I have a 10th generation because it was cheaper. The graphics will work on VGA with an older GPU or regular card. However when it is setup the MB works fine in the Hive.

[MrLAZ]

I have 11th Gen Intel(R) Core™ i5-11400 CPU with built in Intel® UHD Graphics 730 and I can confirm that I have the same problem as all of you. If I plug in the monitor to the motherboard’s HDMI, I can see the bios and everything, until it starts loading HiveOS, than it goes black.

[maras]

Last week I build few RIGs with Gigabyte Z590 D motherboard Pentium(R) Gold G6405 and HiveOS 0.6-213@220310 and RTX 4000 cards (same CPU and GPUs like in my RIG with onboard video output problem).
And output from onboard GPU is now working. So there are two possibilities. Latest HiveOS version fix onboard video output. Or Gigabyte motherboard dont have this issue.

Unfortunately I can’t test the video output on the ASUS board with the latest version of HiveOS, because tghat RIG in a different location and I won’t get to it now .