Increase your income with Hive. Invite your friends and earn real cryptocurrency!

ASUS Dual Radeon RX580 OC edition 8GB


I’m new to mining and trying this card. hashrate should be about 30 MH, but I still have overckloging about 21 MH. I don’t know what I’m doing wrong anymore. can anyone advise?

my last setting

Use mine:

Core clock : 1112
Core voltage : 812
Memory controller voltage : 800
Memory Clock: 2190
Fan Speed : 55%
Aggressive undervolting switched to ON
In the advanced config write the following:
amdmemtweak --REF 200

Let me know what happens

when I use amdmemtweak --REF 200, allways he writes GPU 0: detected DEAD

raise the core voltage to 818 or 824 and try again.

i changed to 824 but no MH?

remove the RDM state ( you have inserted 1 ).
Is addressive undervolting switched to ON? try amdmemtweak --REF 30 at first.

Also set the memory clock to 2150 because you ahve Hynix memory and it might be unstable at higher, we want to first set it running and getting better MH/s and then we will tweak it a bit more. but lets establish stability first.

now i have set

and result is 21.43 MH

lets test with the following settings:

Fan speed 60%
Core clock 1150
DPM state 1
core voltage ( VDD ) 820
Mem clock 2100
amdmemtweak --REF 20

now is result

use the amdmemtweak --REF 20…

I change the amdmemtweak --REF setting from 20 to 100, the last stable is 80, at 100 the GPU is dead
the result at 80 is

something is very strange with this videocard, all kinds of settings and is around 21 MH/s. is it new ? any bios mod?

The card is not new, it was used in a gaming PC with a regular bios

Have you found a solution to this? Read in the web about OC settings for your card.

Hey, I have a Sapphire 580 4GB with the same problem, the bios of the card shows Elpida memory but in Hive shows Hynix. When I applied Polaris 1.5 patch looks like it has 2 types of memory, the patch says found Elpida, and then !!! found Hynix. The bios itself has 512 KB, unusual. Before patch can’t get more than 22 MH, lot of tweak tried. After patch got 31.4 at 70W, core 1145, dpm 1, 825mV on core, memory at 2055. I mine ETC with it, but the algo is the same.

Polaris patch 1.4 you mean polaris editor 1.4 version?

I’ve used Polaris version 1.5, one click patch.

Thanks, after use polaris editor, one click patch, now have 30.71MH

Post the OC settings and stats of the card like temp and fan speed and watts