ASUS 3060 Ti Dual Mini v2 - Memory Overclock issue

[Besty]

Hello miners,

I cannot pass the “1695” on Memory overclock.
Is there any way to achive “2000” or more on these cards?

I am getting 42-43 eth hashrate max, settings here:
GeForce RTX 3060 Ti 7982 MB · ASUS
Hynix GDDR6 · 94.04.46.80.A0 · PL 100 W, 200 W, 215 W

c:54°
fan:90%
cclock: -500
mem:1695
pl:150

Thank you.

[keaton_hiveon]

use a locked core clock instead of the -500 offset, will save some power.
hynix on the 3060tis doesnt like to clock too high, so you may have found the limit of that individual card

[Mozgala]

Hynix memory don’t get as high as samsung or micron, all my hynix cards run at 1700-1800 range OC while samsung memory ones run at 2400-2500.

[Besty]

Thank you for your time and info.
Have a nice week.

[Weiler]

I have 2 of these cards. My best OC settings are: Core 1375, Memory 1650, no power limit set.
With Gminer i got ~43.5mhs, on T-Rex ~44.5mhs.
Temperature around 53-55ºC

[alph2k5]

Hey

I’ve just purchased 4 of these cards and I have them running at:
Core 1475
Mem 1700
Fan 60
PL 135

I do however have trouble with my miner restarting. Now ive been troubleshooting for a few days and it seems that I have 1 of these cards that has the OC too high, so now I’ve lowered it to Mem 1400.

I will keep you posted. I simply think you have to accept that these cards has to be overclocked more lightly.

Edit: Even tho I lowered my mem to 1400, it seems the hashrate stays at around 42-42.5

[alph2k5]

How much power are they drawing without PL set?

[Weiler]

Around 135w, sometimes with peaks of 145/150w for a few seconds.

[alph2k5]

Okay!

I’ve had your settings running for 12+ hours now, and I must say they are super stable. I do have this one card that I cant overclock past 1500 memory, so it’s sitting at 1450.

I cant get the mentioned 44 mhs, but I do get a fairly stable 42.5-43.5. My temps are 62ish, so I think I can get a bit more if I fix the room temperature.

Thanks for sharing your OC’s