More
referral
Increase your income with Hive. Invite your friends and earn real cryptocurrency!

Asrock Q270 13 gpu wont boot with gpu connected

I’ve been stuck for weeks now. My motherboard won’t boot unless I disconnect all the GPUs from the board. I switched the cables and riser, and nothing. I even disabled MSC to see if anything would happen, but with no success. I won’t take even one if it does go to HIVEOS, but without any gpu

what about PSU/cables?

1 Like

Good I even tried with just one since I have 2 of them and nothing

try one gpu in the top slot, no riser with only 1 psu attached

1 Like

Nothing, it will only boot without a GPU connected. I did try to connect using a GPU, and that is the only way I get any display

i found the issue it has nothing to do with hardware it was actually in the bios because somehow it was set to PCIE graphics instead of onboard graphics thats why i can only have display only when i connect to a GPU I think it happen when i did CMOS it reset evething but since my CPU comes with one internal GPU all i have to do was change it to onboard graphis and problem solve but thank you please share this information as well i have seen miner getting stuck and buying new hardware thinking thats the problem when is not