AFAIK work in progress to support Antminer A3, D3, L3
Thanks for the response the other Antminers!
If you’re able to answer any of the other questions above, that’d be great!
I’ve noticed that when power is pulled on the S9’s, the hive agent does not always (or even often) come back to life gracefully.
If you are having this issue, and you have confirmed the S9 is mining (confirmed on the status page), then the following fix will apply:
-
SSH to the box and navigate to the /hive/bin folder
-
Execute the agent-screen command. You will likely notice something like this:
agent-screen
There is a screen on:
30246.agent (Dead ???)
Remove dead screens with 'screen -wipe'.
There is no screen to be attached matching agent.
- Execute the scree -wipe command. This should show you a “(removed)” response (shown below):
screen -wipe
There is a screen on:
30246.agent (Removed)
- Relaunch the hive agent by issuing the “hive” command.
Everything should come back online. If you’re doing this over and over (as I am when power is cut or the unit is rebooted), you can skip step #2 above.
Does anyone know if there is a perm fix to this or to kill my curiosity, what the screen -wipe, agent-screen etc commands even do? All I know is they fix this problem 
Yes, this is a known issue. Will be fixed on the next update with screen -wipe. For some reason screen sessions are stored not on the real tmpfs.
Do you know when this next update will be? It is frustrating to have to sign in every time it boots to run the screen -wipe command. I am not pushing or impatient, just wondering if you have a time-frame.
Tnx in advance.
Hello,
How do you configure the wallets for antminer S9/L3+?
Добрыйй день, оплатил подписку на месяц на 12 Asic, установил, все было нормально, но заметил такую тенденцию, программа постоянно перезагружает устройства и скидывает частоту на 512, при выставленной 550. Потом прога просто уходит в оффлайн со всеми машинками, хотя они продолжают работать
как настроить кошелек для L3?
OK installed the latest version on L3+ and found a bug. Upon install it removes frequecy settings/card. manually setting it on the asic fixes the speed issue.
Q: is it possible to create an OC profile for the asic?
Hello, i installed the version 0.1-03 on T9+, it works but when i reboot the hive doesnt starts,
[spoiler]Mem: 50476K used, 964948K free, 0K shrd, 837768K buff, 837816K cached
CPU: 9.0% usr 9.0% sys 0.0% nic 81.8% idle 0.0% io 0.0% irq 0.0% sirq
Load average: 0.36 0.30 0.19 1/73 3913
PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND
1685 1 root S < 165m 16.6 1 4.5 /usr/bin/bmminer --version-file /usr/bin/compile_time --api-listen --default-config /config/bmminer.conf
3815 3811 root R 2836 0.2 0 4.5 top -b -n 1
1426 1 root S 62204 6.1 1 0.0 single-board-test
1430 1 root S 5820 0.5 0 0.0 /usr/bin/monitor-recobtn /usr/bin/factory_config_reset.sh
20004 20000 root S 2840 0.2 1 0.0 {agent} /hive/sbin/bash /hive/bin/agent
1441 1 root S 2840 0.2 0 0.0 /sbin/getty 115200 ttyPS0
1442 1 root S 2840 0.2 1 0.0 /sbin/getty 38400 tty1
1274 1 root S 2836 0.2 1 0.0 /usr/sbin/crond
1443 1 root S 2836 0.2 0 0.0 {monitorcg} /bin/sh /sbin/monitorcg
1620 1 root S 2836 0.2 1 0.0 udhcpc -b -t 10 -A 10 -x hostname antMiner -i eth0
3811 1249 root S 2836 0.2 0 0.0 /bin/sh /www/pages/cgi-bin/monitor.cgi
3816 3811 root S 2836 0.2 0 0.0 /bin/sh /www/pages/cgi-bin/monitor.cgi
1249 1 root S 2776 0.2 0 0.0 /usr/sbin/lighttpd -f /etc/lighttpd.conf
1239 1 avahi S 2736 0.2 1 0.0 avahi-daemon: running [antMiner.local]
614 20004 root S 2704 0.2 0 0.0 sleep 10
1778 1443 root S 2704 0.2 0 0.0 sleep 20m
1240 1239 avahi S 2612 0.2 0 0.0 avahi-daemon: chroot helper
20000 1 root S 2596 0.2 1 0.0 {screen} SCREEN -dm -S agent agent
1227 1 root S 2092 0.2 0 0.0 /usr/sbin/dropbear -r /config/dropbear_rsa_host_key -p 22
1 0 root S 1688 0.1 0 0.0 init [5]
1110 1 root S 1676 0.1 1 0.0 /usr/bin/monitor-ipsig
7 2 root SW 0 0.0 1 0.0 [rcu_preempt]
19 2 root SW 0 0.0 1 0.0 [kworker/u4:1]
3 2 root SW 0 0.0 0 0.0 [ksoftirqd/0]
14 2 root SW 0 0.0 1 0.0 [ksoftirqd/1]
966 2 root SW 0 0.0 0 0.0 [kworker/0:1]
1197 2 root SW 0 0.0 1 0.0 [kworker/1:2]
1080 2 root SW 0 0.0 1 0.0 [ubi_bgt0d]
10 2 root SW 0 0.0 0 0.0 [migration/0]
13 2 root SW 0 0.0 1 0.0 [migration/1]
1082 2 root SW 0 0.0 0 0.0 [ubifs_bgt0_0]
18 2 root SW 0 0.0 1 0.0 [kdevtmpfs]
12160 2 root SW 0 0.0 1 0.0 [kworker/u4:0]
2 0 root SW 0 0.0 0 0.0 [kthreadd]
4 2 root SW 0 0.0 0 0.0 [kworker/0:0]
5 2 root SW< 0 0.0 0 0.0 [kworker/0:0H]
8 2 root SW 0 0.0 0 0.0 [rcu_sched]
9 2 root SW 0 0.0 0 0.0 [rcu_bh]
11 2 root SW 0 0.0 0 0.0 [watchdog/0]
12 2 root SW 0 0.0 1 0.0 [watchdog/1]
16 2 root SW< 0 0.0 1 0.0 [kworker/1:0H]
17 2 root SW< 0 0.0 1 0.0 [khelper]
218 2 root SW< 0 0.0 0 0.0 [writeback]
220 2 root SW< 0 0.0 1 0.0 [bioset]
222 2 root SW< 0 0.0 1 0.0 [kblockd]
238 2 root SW 0 0.0 0 0.0 [khubd]
253 2 root SW< 0 0.0 0 0.0 [edac-poller]
344 2 root SW< 0 0.0 0 0.0 [rpciod]
345 2 root SW 0 0.0 1 0.0 [kworker/1:1]
355 2 root SW 0 0.0 1 0.0 [khungtaskd]
360 2 root SW 0 0.0 0 0.0 [kswapd0]
361 2 root SW 0 0.0 1 0.0 [fsnotify_mark]
362 2 root SW< 0 0.0 1 0.0 [nfsiod]
1004 2 root SW< 0 0.0 1 0.0 [xemacps]
1019 2 root SW< 0 0.0 1 0.0 [kpsmoused]
1075 2 root SW< 0 0.0 1 0.0 [deferwq]
21417 2 root SW 0 0.0 0 0.0 [kworker/u4:2]
[/spoiler]
Any plan for Antminer X3? cryptonight miner requires more changes to miner and pool than any other miner due to hardforks and profit changes. if there’s Hive for X3, I would join for sure.
Also the date and hour doesnt show the actual date, i guess doesnt sync to any server?
Set config override on the web. “bitmain-freq”, “bitmain-fan-ctrl” and other settings.
Can you give me access to ssh on T9+?
Can you give me access to ssh on X3 for test and install hive?
Yes i can give you ssh access but not today, the miner is not in my house, i send you a pm when im there, also i need to open the ports for ssh.
.
Когда сделаете поддержку WhatsMiner M3?
Hello, antminer V9 support?
Pash_49 Подскажи, пожалуйста, получилось ли установить и запустить Hive на Antminer X3?
Прокачал S9. Возникли предложения:
- Сделать разные уровни Red Temp, для GPU и для ASIC. Либо разные уровни под метки (Tags).
- Планируется ли сделать программный hashrate watchdog для ASIC в разделе Tuning? Очень пригодилось бы, имеется “хромая эска” раз в несколько дней падает одна плата, надо ребутить.
- Можно ли как-то настроить кошелек следующим образом: логин и имя воркера на каждом пуле уникальные? То есть имеется три разных пула, три разных логина и воркера.
- Как нибудь увидеть на каком пуле сейчас работает асик.
Any idea if the new Z9 mini will be supported soon ?