Increase your income with Hive. Invite your friends and earn real cryptocurrency!

As soon as the miner starts, he loses the video and doesn't mine

I have a rig with a 3060ti lhr and as soon as the miner starts it stops giving video and doesn’t mine. I already updated the Hive os , and went from pendrive to ssd but it didn’t solve.

Post some screenshots of your worker overview, miner log, flight sheet etc

have this same with my 3080ti
Ive just sended it into proper service
ive discovered, that for a short time, it cant get OC - it`s set 1100, but only 900 can be seen on nvtool.
Its out of my skills.

is it throttling?

it was, but was unable to check why, it was less than a minute of working.
now it`s in the service.

sounds like the OC was a little too hardcore for the GPU… no video usually means the card shut off to protect itself due to instability… have a rig of 3 3070ti FTWs (post-LHR mandate) and 2 of which can be set to the same OC but the 3rd craps itself every time I try to lock it in with similar OC as the other 2, until I figured out the core wasn’t stable… my suggestion is to tune ONE thing (core or memory) at a time, or it gets confusing as to what caused the issue in the first place, especially when you’re changing both at the same time and in big steps.