@rkwjunior can you elaborate on the part where you told me to set fans to 50c. Is that the auto fan feature? If so do I just set both target core temps and mem temp to 50c? What about max and min fan speed.
Yes, Auto fan. Nvidia only has core temps. Ignore the other temps. Just core.
Also choose “not Amd”
Min 25
Max 100
50c setpoint
You didnt change absolute core to 1060
Dont use 0 power limit unless you have absolute core settings applied. Absolute core controls power limit
Set your auto fan setpoint to 50c and put fan speed to 0. Hive will automatically maintain 50c, you dont want ur fans at 100% all the time.
For over clocks on 3080 use
1060 absolute core
2300 memory
0 power limit. Youll probably save 10 watts per 3080.
And thank me later…lol
Id still drop ur memory to 2300 or less. 1MH isnt worth killing ur GPU.
Im actually at 2275 mem and 99.4 Mh 215 watts
No problem. Let her run, she’ll settle out nicely
How much power did you drop?
Saving money, more profits!!!
Good luck
1 Like
Hi rkwjunior
May be you have a solution for my problem !!! I have a fall of hashrate after adding a new GPU ? Cannot figure out was it the problem: new risers installed, GPU swaped on risers, … : still have the problem on 2 cards since I added a GPU. If I remove the new card, there is no problem.
i think your first PSU is more loaded than needed. You are using 24 pin splitter to power the mobo right? and also powered the additional power plugs on the mobo right?
i think your first PSU is more loaded than needed. => Loaded @ 73% (770W used for 1050W PSU1
You are using 24 pin splitter to power the mobo right? Yes
and also powered the additional power plugs on the mobo right? Yes, all the Mobo with PSU1.
I can do a try by switching a 3080 of PSU1 and a 3070 of PSU2 in order to see if there is a difference.
Try it. Swithc one gpu to the second psu. The calculation of the max power you can draw from a psu is different. If the psu is lets say 1000 watts it depends of its rating gold silver platinum , 80% 90 or what ever. Lets say its 80% then the real watts you can pull from a 1000 watts psu are 800 in reality. So you are close to max.
rkwjunior, can you share OC for 3070s?
I have 64.3 MH with 200/3100/130 and 130W consumption.
With your OC for 3080s, I have about 99.7 Mh/GPU and 225W with T-rex miner.
Only for 1 I need to set 1060/2050/0 or I will have errors and miner reboot.
Ya, your waaaaay to high in ur memory. Thats gonna kill ur card. Max is 3000.
3070s.
1070 absolute core
2600 mem
Put power limit at 130 but you really don’t need it cuz of the absolute core clock power control.
62.3 MH at 110-115 watts depending on GPU
3080 I do
1070 absolute core
2150 mem
Power limit is 230 but not needed.
99 mh at 208 -215 depending on GPU
Set an overclock delay of 30 seconds, that will help invalids after re boot
Currently I have 3060 ti, 5 right now running. Anyone see any improvement required.
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.