Since yesterday my RX 6800 XT stopped at PhoenixMiner. Think until it burned.
I have this problem too. My rig has worked for 10 days nonstop, but yesterday, phoenix miner reboot by itself. Problem says Gpu * is not responding. So I tried to change miner from phoenix to different miner like teamred or gminer and its Fine. But tried to Turn back to phoenix, its still not mining. Could you please help me to deal with this problem?
It also stopped here yesterday in the middle of the day! It had been operating normally for more than 20 days (average of 63.3MHs). I had to shut down and go to windows with PhoenixMiner 5.5c. There also gave error, but when setting the parameter “-clKernel 0” it started to work well. So my question. Could it be that if we put this parameter on hiveos it would also work? Does anyone know if it is possible to parameterize the ethermine call in HiveOs or even downgrade the RX6800 drive? In my opinion there must have been some automatic driver update or something of the kind that affected us all. I can not switch to Teamredminer because I have nvidea cards together on the rig: ((.
You can run a flightsheet with two miners one nvidea specific(t-rex) one amd(trm) or nbminer also works
Thank you very much Buldog_13 … I really ended up not considering that this possibility could exist.
Great now it is working (but I could not keep the phoenixminer in the NVIDEA cards, because even though it was not mapping the AMD, it was still accusing error).
So I changed like your suggestion and it worked. The only thing that puzzled me is that only one of the mining is being reported in the “ethermine”.
Am I doing something wrong? Apparently it is processing correctly because the “Current” is coherent, but why is the “Reported” getting this way (half) ?
Someone would know inform me if I’m doing something wrong?
Thank you very much in advance.
Mine does the same thing, I first thought maybe both miners “report” and it just messes up the graph but that doesn’t ass up for me either one miner reports 150, and the other reports 60, while my reported hashrate is only 126. I think it is reported correctly regardless as my daily estimate is .00755/day and I wouldn’t be getting that at only 126mh/s
1 Like
How do you divide your flight sheet up to specific GPU’s? I see that I can add a miner, but that is just to mine a different coin or in a different pool, etc.
I think I already found it in the extra configs, specifying GPU’s.
You may be able to do that under “setup miner config” in the flightsheets. I do not know how to do that. You can any coin/pool they can be the same does not matter. You have two options to make your flightsheet work. First option set a miner that is Nvidia only, and one that is AMD only, the amd cards will load in the one miner, and the nvidia in the other. Your second option is set the problem card miner as the first one to load. In our example we are having problems with AMD so I set the first miner as Teamredminer, the second miner I set to T-rex as it hashes the best for my Nvidia cards, but I could set the second miner to any miner and it should load up as long as my AMD cards are already loaded on TRM.
I figured out how to fix this issue under flightsheets if you click setup miner config, and set a name under worker name such as %12345% for each miner and have different names, your reported hashrate will be recorded correctly
1 Like
PERFECT!! That’s right, Buldog_13! I imagined that we would have to do some configuration to avoid this error in the MHs reported to ethermine. I made this adjustment in the configuration as you suggested and it worked perfectly here too. So this is it, when you have more than one miner configured in the flightsheets, we must put different names to them in the “worker name” field.
Thank you very much Buldog_13 !!
Thanks, thats solve my problema, i changed the config on flight sheet. and click on setup miner, select phoenix miner 5.6A and in extra config arguments i added in the end “-clKernel 0”. And works very well ! =) I love u.
2 Likes
Buldog, how is your MHs for your 6800 now? Can you send a screenshot here to us?
Thank you!!
Gabriel, share here your screenshot for you MHs for yours 6800 and OC over 5.6a
I’m stable around 60.8 on one card, and 60.2 on another, I am still playing around alot though able to push both cards up past 62 at 120watts but have yet to have them stable there the tempatures don’t rise though so there has to be a way
Happy to be of help, … success in your mining Gabriel !!
Good evening! From your post I see you have a Radeon 6800 running on hive os and know a great deal about the configuration…I just bought one and I cannot get it to recognize the card. Is there anyway you can please guide me to get my card set up?? I’m just getting into the mining and not too technically savvy unfortunately… any help you can provide would be greatly appreciated.
Ty
try to download the latest hiveOS image, that solved my problem.