Thank you for answering! I could not get it to work, so swapped it out with a new 3070. Now the gpu ID’s are good, so i think its just a stabillity issue when you are using a lot of NVDA cards and only a few AMD cards.
check out this vedio. It will solve your problem.
Thank me later
1 Like
check out this vedio.
It will solve your problem.
Thank me later
So far the settings are working well. Went from 43 → 46-47 MH and dropped Watts from 178 → 129W
1 Like
thanks @AnirbanMiner02 with your config I was able to get 3 more Mh/s and use less power, without messing with BIOS etc. so I can still use my pc for gaming
1 Like
You are welcome🥰
I’m on Instagram as @cryptonite_miner. I have a solution
Welcome
No, you haven`t … with 47MH
No problem😊 my 6700 is consumping 111w …happy mining
Hey all, I made a topic on issues with HiveOS and core voltage of RX 6000 series. There is a bug in HiveOS which causes the RX 6800 to draw about 30 watts more than neccessary in HiveOS. This is very likely the case for the RX 6700 XT too and you can check it out easily by comparing VDD settings to the milivolts shown by TeamRedMiner. Check out this topic and ask HiveOS support to solve this if the problem exists on your righ too!
4 Likes
No changes 
What miner you using?
If you have what to say, say here…
Hi
phoenixminer 5.5c works without any problems on newer 5.6 … I don’t want to start my 6700
1 Like
I have powercolor fighter 6700, using hiveos and phoenixminer, amd driver version 20.40. After latest update to 0.6-203@210512, it stopped working, power usage just 11w and whole rig become unstable. Removing them, system back, installing them, unstable. No matter what i tried, couldnt fix it. Anyone here has similar problem or be able to help would be great.
Hello,
please some help for not mining?
I downloaded BETA hive and upgrade. First my GPU callo UNKNOWN and after upgrade is name ok, but not working… THANKS
yes please hiveos support fix this 