For some folks, I’d be warry of the latest HiveOS release 0.6-203@210503. In the release notes, its states:
" * PhoenixMiner v5.6b (added support latest drivers for Linux. Notices: 1) this is Beta release of miner and added for testing purposes - need select version manually in miner settings 2) RX 6000 series “BigNavi” seems broken after epoch 412 in v5.5-5.6b: use v5.4c or other miners)"
possible skip for folks (like myself), who use rx 6000 series?
Actually, teamredminer.
Picked up a very expensive 6700 xt yesterday. Not very impressed with it’s performance. We can call it an impulse purchase I guess.
Waiting earnestly for some bios modding to come about for that one.
And successfully bios modded my rx580 and happily pulling 30+ mh/s. (Not sure why hive identifies it as a 480)
hey guys, i have been running stable with 2x rx 6700 xt for a month. I bougt a 3070 to swap with the hot running founders card, and suddenly the ramaining rx 6700 card wont show any info. I tried different slots on the board (Asus b250 ME) and it shows up as green/connencted during boot. Any ideas on what to do? I will post the before and after image.
Having multiple cards on same GPU ID seems wrong. I would suggest you check to see if there is any shorting of the risers on the Motherboard or if the power is enough for the GPUs and their risers.
Thank you for answering! I could not get it to work, so swapped it out with a new 3070. Now the gpu ID’s are good, so i think its just a stabillity issue when you are using a lot of NVDA cards and only a few AMD cards.
check out this vedio. It will solve your problem.
Thank me later
check out this vedio.
It will solve your problem.
Thank me later
So far the settings are working well. Went from 43 → 46-47 MH and dropped Watts from 178 → 129W
thanks @AnirbanMiner02 with your config I was able to get 3 more Mh/s and use less power, without messing with BIOS etc. so I can still use my pc for gaming
You are welcome🥰
I’m on Instagram as @cryptonite_miner. I have a solution
Welcome
No, you haven`t … with 47MH
No problem😊 my 6700 is consumping 111w …happy mining
Hey all, I made a topic on issues with HiveOS and core voltage of RX 6000 series. There is a bug in HiveOS which causes the RX 6800 to draw about 30 watts more than neccessary in HiveOS. This is very likely the case for the RX 6700 XT too and you can check it out easily by comparing VDD settings to the milivolts shown by TeamRedMiner. Check out this topic and ask HiveOS support to solve this if the problem exists on your righ too!
