In my opinin 99.5 is fine.
I`m getting 95% sommetimes on nicehash-ethash - that sux.
1 dont mine on hiveon,
2 this is a ERGO topic not eth
For Ergo 3070:
CORE 1500
MEM0 0
PL 150
170/171mhs with TREX last update: don’t OC memory ergo is cold algo use juste bandwitch memory
Veo que una 3070 le esta dando 166 mh, eso es correcto o estoy equivocado?
I see that a 3070 is giving 166 mh, is that correct or am I wrong?
On ergo yes
Que configuracion puso que lo llevo alla?
What configuration did you put that took you there?
mi tarjeta solo llega alrededor de 63
my card only arrives around 63
Abs core 1600 / mem 2600 try this.
T-rex miner
More information here:
ERGO Mining
ERG is a gem for 4 GB AMD GPU. At the same time it’s rather good for both Nvidia and AMD cards.
Best Mining Software (Miners)
TeamRedMiner (for AMD)
T-rex (for Nvidia, memory tweak support)
ERG Hardware Hashrate Chart
Nvidia:
P106-90 - 45-50 MH/s
P106-100 - 55 MH/s (Nbminer, with mt parameter)
P104-100 - 80 MH/s (Nbminer, with mt parameter)
1050ti - 35 MH/s
1060 - 50-55 MH/s (Nbminer, with mt parameter)
1650 - 35-37 MH/s
1660 - 41 MH/s
1660s - 63 MH/s
1070 - 70 MH/s (Nbminer, with mt parameter)
1080 - 72 MH/s (Nbminer, with mt parameter)
1080ti - 115 MH/s (Nbminer, with mt parameter)
2060S - 75 MH/s
2070s - 78-84 MH/s
2080ti - 105 MH/s
3060 - 115 MH/s
3060ti - 170 MH/s
3070 - 170 MH/s
3070ti - 175 MH/s
3080 - 225 MH/s
3080ti - 270-280 MH/s
3090 - 276 MH/s
AMD:
R9 390 - 52 MH/s
RX460 - 35-37 MH/s
RX488 - 60-68 MH/s
RX574 - 60-68 MH/s
RX550 - 35-37 MH/s
RX560 - 35-37 MH/s
RX580 - 60-68 MH/s
Vega56 - 160-170 MH/s
RX5700 - 105-110 Mh/s
RX6800 -
Source: woolypool
Sick
Love that
Amigo, es otra moneda (ergo). Se tratan de velocidades no aplicables a ETH.
Just keep in miund, LHR versions of typical 3060ti, 3070 and 3080 could go worse…
Where to minine so? Any other OS?
Ya, Erg is not Eth, absolute core doesn’t work well, erg needs more power than most people think.
-502 core
2600 mem
125-135
170- 174MH
– minining ERG on Nanopool/Nanominer with HiveOS. Currently I have two 3070s and I will add one more 3070ti next days. My hash rate and OC settings are shown below. What is strange is that frequently I see the statistics from the pool that the hash rate drops at very low levels (100-200 Mh/s) and i don’t understand why this happens. any ideas?
Do you see these errors only on the pool? Or do you see them in the HiveOS UI? I’ve seem some strange things happen in the HiveOS UI when the api doesn’t work right or the internet is spotty, I’ve confirmed the issue by checking the ‘agent-screen’ on the miner at the time these strange things are happening. Since the agent-screen is telling me there is a reporting issue, the displayed hash rates are not relevant as everything is fine. I would start there and see if it’s just a misreport or it your hash rate is actually dropping.
Locking the core clock is fine, just need to pick a higher number. Here is what I’ve got. I had the core locked at 1700 and was getting 173mh per card, but at an extra 10 watts per card as well. I decided to sacrifice 14 hash rate at the benefit of 70 less watts
You could still go to 2600 mem safely also .
14 MH is substantial, alot more than 70 watts. Id take the 14 Mh.
Go to what to mine and look at the profits
Left it at 2500 mem overnight and threw a few invalids, not sure I’ll want to go up to 2600 with that
I’ll keep playing with it.
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.