having the same issue with all my hynix memory gigabyte 3060tis
did you do what i said in the comment above too?
Yes.
I switched all the raisers and cables and even put the graphic card directly on the motherboard PCI slot, same instability.
The only thing I did not do was to rewrite HiveOS image, seemed a bit overkill to me since I have latest updates and NVidia drivers (510.73.05)
I kept the core clock as high as possible (1300) while lowering the memory OC to 800.
I also adopted version 42.2 with arguments “lhr-mode”: “2”, they claim it solves some instability issues.
It has been running stable for 22 minutes so far…
Still unstable.
After 30 minutes hashrate went down to 18 MH/s
I observed better stability with lolminer, core OC 1300 and memory OC 800-900 (conservative, could be slightly increased). Running for more than 2 hours
Here are my settings I had to update the Kernel as well. Type this command in
hive-replace -s Replaces the kernel then try these settings.
Fan 100 - Core 1500 - Memory 2200 - PL 170
I’m getting 60.75 MH with a drop every now and again it doesn’t last long
well, ive tried absolutely everything (updating kernel, reflashing new hiveos, lowering overclocks you name it) and im still getting the same error. It looks like im not the only person whos having errors with their 3060tis tho
Flash the latest stable image and troubleshoot after. You’re on a very old kernel and that will rule out software issues in about 15 minutes.
Post a screenshot of your worker overview screen
I’m upgrading right now. I’ll keep you posted. Thanks for helping out
My reply about the screenshot was to the other guy, but your clocks could use a little work to be optimal.
Remove power limits (not needed with locked core clocks)
Find the highest stable mem clock (if it’s not stable, reduce it)
Find the lowest core clock that maintains full hashrate (don’t reduce this after finding the optimal value)
I flashed a brand new hiveos image yesterday but im not exactly sure what you mean by Kernel. Anyway heres my worker overview screen
follow the steps i commented above your last post. your core is too low, and your memory is likely too high if its continuing to crash it.
your hive install/kernel are up to date so no need to worry there.
Finally ended up with something stable. If anyone else is having issue the thing that worked for me was 1500 core clock and 1500 mem clock. Hope this helps someone
No effect here.
I’m all updated (online update, no msata/ssd reflash).
One of my rigs uses a b250c mobo and 12x GPUs. I rechecked every single usb cable and riser, was able to change the 20mhs from GPU #9 to GPU#7, replaced the 3060TI with a 1660TI and the issue reapeared in other 3060TI GPU. And the 3060TI that was taken out, was working at 61 MHs in other RIG as it’s second 3060TI.
So seems to me that is more related to 3060TI processing and not with the rig hw.
I did no changes or updates in the motherboard and it started few days from the 1st LHR fix.
Did you resolve this? I am having the same issue.
No way.
I tried everything.
Finally I sent it back for diagnostics since it is still under warranty.
I suspect hardware is faulty
1 Like
Thanks. I am waiting for my Gigabyte RMA to get approved and will do the same thing.
Guys, I’m having the same problem. I’ve done everything. I changed risers, changed slots, updated kernel, downgraded and updated drivers and nothing solves it. I have 4 cards and this is happening with one of them. All with hynix memory.