Thank you for sharing your experience with 3070 ti. I also set my eyes on GeForce RTX 3070 Ti AMP! Holo LHR, but those at teachpowerup are “scared” by how noisy it is and the fact that it is still hot, plus consumption over the other 3070ti. What power suply do you use? GPUs have spikes, that zotac model has 392W (20ms)
I don’t think they are that noisy. My 2080 Super are more noisy.
I have a 1250w PSU which should cover spikes and HiveOS looses the OC settings. I also have monitoring of power built in the outlet and if the outlet exceeds 1000W it will send me a notification and 5 minutes after that power down the system incase power is still exceeding 1000W.
Omg, thats awful efficiency…Power consumption is ridiculous.
Screw those Tis
I’m not paying for electricity
Im taking about the majority. 99.9% of miners pay for electric. These cards suck for 99.9 % of us.
And more watts means more heat which means more wear and tear on ur GPU. So they suck still Even with free power.
Dont be so sensitive. Hearing the truth can hurt sometimes
for god sake my 3070ti use 130w, why you have 240+ ?
What are you mining and what OC settings?
i use gigabyte 3060ti oc 8 gb
core 100
mem 2000
i got max 23
i tried your oc, result is the same.
If you have a higher profit, consuming more energy, why not? Question: Have you seen my comment with the settings for 3060 ti lhr used by someone who mines with 31.46 mhs?
Oh, they are different cards, I have 3070TIs and mining RVN at around 40MHs. You have a bit higher efficiency than me
yes and i replied to you that my retarded card can’t mine more than 23 mhs, no matter what oc i put
Sorry, i m new on this forum, didnt see the reply under my comment. How about this? it is gigabyte, but not lhr https://www.youtube.com/watch?v=Cp7JRb8tLAQ
well i guess that problem on my side is lhr card
I would go for Ergo instead of Ravencoin, Ravencoin stress the vram on GPU and will burn out in future, it can reach more than 104C that is the limit.
3060ti LHR is my favorite because is cheap and can make 133.
3070ti LHR is way more expensive and gets little hotter when mining, can do 173.
I can’t tell on 3070 LHR because I don’t have, but for sure I will be getting 3060ti LHR & 3070 LHR for Ergo
I never mined ERGO.
And yes for raven temp jump up and usage is up to 180 watt.
Is there some “manual”? Which wallet, which exchange to use, and stuff like that?
tnx
You mean for Ergo?
you can use miningpoolstats.stream/ as an directory for any coin, inside it tells you everything like pools, supplies, exchange, value, difficulty, etc.
from here you have to do your own homework.
I mine in nanopool and exchange in coinex for usdt.
The “problem” with 3060ti LHR is that there are models with diffrent type of memory (i think). Someone here complain for low hasrate on 3060ti lhr, mining ergo. I also found little data about mining with 3060ti lhr and the data are controversial. One person stated that has good hasrate with raven, other person (here on the forum: hfcartel) stated it has low hasrate
On the other hand, data for 3070ti suggest consistency on all models (all have micron memory). For that i like 3070ti.
About 3070 LHR: too little data
problem with 3060TI and mining ravencoin is that you have to set oc to 180 wat, card will heat up to 75 and your profit will be miserable.
i mine etherum now on max 34mh with 3060ti lhr but with 100 wat and temp is 39
180W it shouldn’t be a problem for a GPU that has an official TDP of 200W. By the way, in games EVGA 3060 ti FTW3 consumes on average 223 W (Founders Edition has 200). Then why is 180W a problem?