3060 downgrade to 460.39 problem

[DeadlyDeal]

Hello guys,

I am having problem with downgrading driver for Nvidia right now I have 460.91.03 and I wanted to downgrade to the 460.39.

My card is MSI RTX 3060 12GB Ventus 3x
Running HiveOS - 0.6-209@210831
Using usb 3.1 for OS

How I downgraded driver:

1. I did it as my friend who did this before said update hive to the current version
   1.1. I threw the rig into maintance mode and rebooted
2. Hive shell command via web browser line not miner
3. used command - Nvidia-driver-update —list
4. then picked version - 460.39
5. Next download started and finished ok
6. Installation finished ok
7. Some reinstallation immediately after installation finished ok
8. after that I restarted rig and it never load back to hive and having problem starting.
9. Problem with running hive and getting error - fixing recursive fault but reboot is needed

After this I need to make new usb and start over coz it never solve recursive fault.

Any ideas?

Thank you a lot

[tom-i]

You can deactivate loading graphics drivers under maintainence mode → without loading graphics drivers in the app.

Then your rig will start and you can install a matching nvidia driver for your card.

It looks like your card has a newer pci id so the driver does not match.

[tom-i]

Image doesnt matter. If it has a newer pci id it will not load 460.39. Install a newer driver 465.xx and check if it loads. then check pci id with lspci.

[DeadlyDeal]

it loads up OK with driver 460.91.03 so I don’t see point upgrading to even newer version? maybe I am missing something. Thx

[tom-i]

My LHR v2 cards have best performance / wattage with driver 470.63.01.

[DeadlyDeal]

There was trick with driver 460.39 it will go up from 26 mh/s to 40 or 50. that’s reason I wanted downgrade.

If that’s possible with new drivers?

I may try it then

[Johnny5]

I’m running my 2 RTX 3060 at about 33 or 34 MH, I wasn’t able either to downgrade to 460.39. How much are you doing?

[DeadlyDeal]

Hi, I just created usb with old stable version of hiveos 0.6-205 and Nvidia driver 460.84 and trying to downgrade to 460.39

with driver 460.90 just 27mh/s
with driver 470.63 same 27mh/s

[DeadlyDeal]

Are you using lolminer or etherminer?

Thx

[DeadlyDeal]

@tom-i

then check pci id with lspci.

So i did lspci and this is answer Ga106 3060 rtx LHR ver a1

[Johnny5]

I’m using Pool Ethermine, and miner NBMiner.

[DeadlyDeal]

I am with teamredminer and t rex and i can get better mhs compared to nbminer

[Johnny5]

How much are you getting on those miners?

[DeadlyDeal]

Rx480 rog 27mhs and rtx3060 26.90

[mhercad007]

how`s the hash rate of the driver 460.91.03 in RTX3060?