0% fan on card

[painting]

I’m using autofan on the cards, with 30% as min. Did set the gpu at a reduced power rate (those 56W are on purpose). Still, this gpu shows 0 fan speed. I went to see the card and the fans work alternately for a few seconds at low rates.

Even though everything is working correctly, and the card is below the targeted temperature. Did set a minimum speed (30%), hoping the fans wouldn’t drop below that.

Some cards sometimes do the opposite. They will go at a higher speed even regardless that the temperature is below the set point.

Could it be a conflict between lolminer and hive?

[keaton_hiveon]

what cards are you using it for? typically 0% fan display means that the driver crashed because of too aggressive OCs or a possible hardware issue.

[painting]

I’m mining ton with a GeForce RTX 3060 Ti 7982 MB · Gigabyte (Samsung GDDR6 · 94.04.46.80.B1 · PL 100 W, 240 W, 250 W).

The OC is 875/0. I know it can do faster, but we are in an energy crunch currently and need to reduce our consumption.

Just saw the card, and about every 5-10s it spins the fans for a few seconds. My guess is all it needs to keep the temperature at the set point. However, it is being very rude to ignore the min fan speed

[painting]

Found something that might explain why that card is misbehaving. Even though it shows 0 speed, it claims 34%

  PSTATE P2, PWR 83.3 W, Temp 55 °C, Fan 60 %, RPM 892, RPM 890
  PSTATE P2, PWR 96.9 W, Temp 57 °C, Fan 52 %, RPM 968, RPM 969
  PSTATE P2, PWR 98.1 W, Temp 54 °C, Fan 35 %, RPM 1427, RPM 1428
  PSTATE P2, PWR 103.6 W, Temp 55 °C, Fan 46 %, RPM 1710, RPM 1711
  PSTATE P2, PWR 56.4 W, Temp 36 °C, Fan 36 %, RPM 1426 (30 %), RPM 1396 (30 %)
  PSTATE P2, PWR 81.4 W, Temp 54 °C, Fan 45 %, RPM 639, RPM 644
  PSTATE P2, PWR 82.8 W, Temp 39 °C, Fan 38 %, RPM 1993 (30 %), RPM 1875 (30 %)
  PSTATE P2, PWR 56.3 W, Temp 53 °C, Fan 0 %, RPM 0 (34 %), RPM 0 (34 %)

The miner hasn’t crashed, since the other card (5) mining ton shows a constant nonzero fan speed

In case you are wondering, the time when fan 8 showed a constant nonzero value, was before I reduced the core frequency, thus reducing the power from 83 to 53 watts

on a side note, is there a way to deselect all other gpus on a stat graph?