I try hahaha, of all the ones I tried it was the most stable, but it’s ok, before it was 42mhs
56 can do over 50 mh/s very stably, but it’s much better to run them on ERGO at 180+ mh/s - much more profit.
bro help me. i have asus rx 570 8gb. tell me.you moded bios and give settings bro
bro what is vdd and vddci ? where i find?
VDD is gpu core voltage, VDDCI is memory controller voltage.
1 Like
I am currently doing 32.22 with the polaris bios editor Ubermix 3.2 for Samsung.
Settings
1168 core clock
860 core voltage ( VDD)
800 memory controller voltage (VDDCI)
2100 Memory clock
amdmemtweak --Ref 35
Aggressive undervolting on
2 Likes
bro give moded bios ubermix 3.2 pls
raise the core voltage to 875 and check if it still gets invalids. if it does , maybe memory is high and test with 2070.
https://drive.google.com/file/d/1sHXkrHkLP1WE6vv4420ngGaVMOGpQw8G/view?usp=sharing
this is a link to my bios.
Its for
Radeon RX 570 8192 MB · ASRock
Samsung K4G80325FB 113-TIC34821-001
as you can see it does 32.22 and it gets 104wats because this one is power hungry beast.
bad silicon lottery.
was missing do BIOS mode. I did and I left this OC, that’s what has been stable so far. If you have any tips. I used polaris one click.
1 Like
1150 core clock
860 or 875 core voltage
2100 2150 mem clock
I will test, because the OC that is currently, is turning off with time. Need to leave tweak on? if yes, do I leave amdmemtweak --REF 30 ?
Leave ref rate yes
hi bro, would you pass me your bios mod of the rx 570 hynix?
Uze core clock 1150, core voltage 850 or 860.
Memory controller voltage 800. Memory clock 2100 2150 or 2200.
Amdmemtweak - - Ref 30
Remove the dpm state.
usei polaris 1.7.5, one click 3.1
I suggest uber mix 3.2 not 3.1
o meu esta dando dead e teamredminer reboot, assim que liga