Update. I lowered it all the way down to 60 and it still happened.
Going to try downgrading NBMiner to version 39
please update if its stable i am having bad time with my rigs right now every time need to restart it and sometime return to normal LHR.
I’ve been running stable now on Version 39.0, at LHR at 64. Low, but it is stable for now: been running for more than 2 days now 
Holding steady for 16 hours so far on version 39 with LHR at 68. Guess it was just a bug with version 39.1.
It’s what I get with this extra parameter on nbminer (using39.1) without any issues
“lhr”: “0”
still need to tweak core clock / memory clock to find the sweet spot.
I had the same issue with my 3080ti so i downgraded hive os to run the Nbminer 39.0 and it seemed to fix the hashing drop issue for me.
where you can load the ese command, do you have an image please because I don’t know where to load it
Hiveos just released an update that has the new NBMiner 39.2. Anyone try that one yet to see if it gives another boost?
I’ll try it now and report back tonight.
So far so good, i’ll post again if I run into any problems.
I saw reports that the 3080 Ti can get to 86 Mh/s. Are you seeing that?
I get 79 to 80 mh/s with LHR set to default. I set LHR to 70 and it would reach 84mh/s, but then go back down to 79mh/s.
Bounces back and forth, but I had to up my power limit from 265 to 300. Don’t think it’s worth it.
I was able to get 82mhs with v39.2 @268watt. The only problem is the temperature shot up to 66 degrees. I’m not sure if this is worth it compare to mining ERGO with 262 MH.
Nice. What are your core and memory settings?
1560c, 2800m, 230pl
Yes, if your tweaking is correct. 3080ti will never be rock stable because nbminer fight with lhr. but for me I’m between 84mh/s & 86mh/s @ 1450 GPU and 3200 Memory with nbminer extra command line => “lhr 0”
1 Like
Tried this downgrade and doesn’t help for my case
Tried this as well. Doesn’t help either.
