I’m using RX 590s with Hive OS and per the card install instructions you need to use all the power pins on the RX 590s [8 + 6 pins] for the card to work.
i would allso likee to know how those setting are working for u? hope stable and happy mining
hi
Could you show us your overclocking configuration sheet?
Here is my few 590´s and one 580 on the same rig, there is a massive difference on memory brand and type, i suppose that optimal vbios plays a key role allso. Dunno for sure but i belive that psu power distripution is one wery important thing allso…some cards just perfom better than others? realy interested about this topic…following
With the same settings I am getting about 27 mh / s. What is the reason of this?
what are you mining? and what miner is it using? it seems that for ETH this is good
Estou usando uma RX 590 Gigabyte, qual OC melhor que conseguiu na sua ?
trm eth
Any of you having problem with Hiveos not booting when adding a Rx590?
there should t be any issues to add 590 to rig… most likely there is too high oc in some card, your 590 have bad vbios or other issues… driver related maybe, riser issue…?? Really hard to say with the info u have put out to support your request for help. good luck and hope u get it up’n running soon.
Thank you for your reply!
-
I have tried with different risers.
-
Different PSU
-
Connect directly to MB
-
Setup to mine via NiceHash on Windows 10 - works fine
-
I bought it used but I have never myself touch vbios or OC settings
-
Changed MB ASCM settings
None of the above worked.
Hardware:
Motherboard
DH67BL Intel Corporation (BLH6710H.86A.0076.2010.1115.1959 11/15/2010)
CPU
8 × Intel® Core™ i7-2600 CPU @ 3.40GHz
Disk Model
ATA KINGSTON SNV425S 128GB
16 GB Kingston RAM
2x GeForce 1660Ti
what are your ALL oc values that u have on that 590?
Same problem. My amd Rx 590 mining well on Windows, but when try do this on hiveos miner goes offline after about minute.
what ? BIOSMod
my RX 590 in max 29,8MHs
Hello guys, I have same problem, hive can’t detected rx590 GME XFX, I try install any version of hive os beta or stable old or new and try push any driver from amd to hive but still Rx 580 detected by this stupid!
With bios mod on NiceHash os (Linux) rx590 correct recognized and work with 32 MHS but I don’t like NiceHash buz very unstable,
But try with bios mod in hive and I can give this results, not enough but good for now , I hope hive support team or someone fix this problem
I have the same problem I bought a used 590 saphire and although it detects it, it does not start mining. restarts or cycles after the others started the job (rx 580 and 5600)
I changed my Motherboard and then it recognized my Rx590.