Nothing changed
So GPU1 doesn’t get recognised? Checked the power, USB cable, riser, splitter, all connected correctly? Post some pics.
I will later
Tried changing the riser and USB cable?
Twice
Also tried to change the PCIe slot? Swap the cards, connect the dead one straight into the MOBO, disconnect the other one, see if it works?
Mobo is the latest version on the BIOS flash?
I did everything you said, but i think the problem is in this: I connected one of my 3090 in the main pcie slot and other one in pcie with the riser, tommorow i will try to put both cards on the risers
Still nothing
Load just one GPU at a time, see if it is seen.
Bios settings, make sure PCIe is set on gen 2 or 3, 4G is also enabled.
When i load one by one it is seen normally 4g is enabled
your problem is related to pci-express.zotac graphics cards dont accept other PCI-express.so you can use the card i showed in the picture,this will fix the problem.
Thank you for answering but actually i solved the problem, i bought a new mobo, now everything works
those rtx 3090 are flashed?
Extreme Solution, you know what might have happened with other mother board? Im having the same issue with one card,
Could you please tell me what is the ambient temperature of the place where you have your rig, thank you
Hello,
Guys, did someone else solve this ?
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.