RTX 3060 Model 2504 (aka LHR v2) HiveOS Hashrate Limit's

[gunzen]

At ERG and ETH…

[linkindog]

For ETH i use 1450 Core + 2650 MEM + 110PL

For Ergo it various up to each card from -500 to -350 core + 2650 MEM + 100 - 105 PL.

[linkindog]

I just manage to stably pull out around 95% capacity on 3060 12GB LHR V2 on TREX 0.24 Dual mining.

15MH ETH = 30% of 50MH full capacity.

15MH RVN = 65% of 23MH full capacity.

Here is my OC & driver running this rig, Stable for 17 HRs now.

[Seje]

[STEM]

3060V2

[xandi8207]

try these settings
Fan 70
Core 1500
Mem 2200 - 2400
PL 120

[LordBullington]

Thank you for sharing your settings!! I downgraded the driver and used the same oc. Works like a charm. I get the best results with lolminer:

miniz (which you above) didn´t work at all strangely:

NBminer was slower than lolminer and had more fluctuation.
I noticed that the power consumption value is jumping up and down in the HiveOs WebGUI. It´s more stable in the miner itself. But I guess I have to get a power meter to know what exactly is going on.
Hopefully the miner developers find a way to increase speed for the LHR cards even more!

[cemko28]

lolminer the best for lhr card.

[sepheronx]

So I have switched over to gminer 2.71 on hiveOS and so far it has been more stable than nbminer.

[scholtzbros]

Is the new 35+ Mh/s unlock works on 3060 v2 with riser?

[tlsolutions]

I suggest lowering the PL on your 3060’s to 103, why would you want to use more power then needed? This is not a perfomance race, where you use nitrogen cooling to overclock stuff. Be more thoughtful, gaining 1.5-3% performance increase for 10-20% power cost increase is a no-no. Here is the example:

[gifarmining]

use driver 470.74 use new version of trex u will get 35mhs

[gifarmining]

lol miner can get 39mhs ? are it stable…?

[tlsolutions]

Those are v1 LHR cards with driver version 460.39

I’m not using NBminer 39.7 with v1 cards because they can’t do more then 35 MH/s that way

[gifarmining]

u right brother

[sepheronx]

I have been using gminer 2.71 for about a couple of days and so far so good. It has been far more stable.

[gogikr]

is it normal miner uptime to restart in an hour,booted time was 1 day, but i rebooted the whole thing and then after 1 hour miner uptime did a restart. Im using hive since yesterday, but yesterday with nbminer was fine

[scholtzbros]

With NBMiner, driver 470.74
EDIT: [auto fan is enabled]

[xandi8207]

you could lower your oc settings… core 1500, mem 2400, pl 120 … 105W and ~35.7 MH on each, but longer life for your cards and smaller temps

[ob812]

@tlsolutions

I suggest lowering the PL on your 3060’s to 103, why would you want to use more power then needed? This is not a perfomance race, where you use nitrogen cooling to overclock stuff. Be more thoughtful, gaining 1.5-3% performance increase for 10-20% power cost increase is a no-no. Here is the example:

I see you have installed the 460.39 drivers, whenever I try I get the error that hiveos no longer boots, how did you do that you can use the drivers?