im looking for the same
You need to update the NVIDIA driver.
The updated LHR cards will not boot into HiveOS with driver 460.39
You will have to unplug the updated LHR cards and allow HiveOS to boot.
Then open the shell and type in: nvidia-driver-update --latest
Then power off and re-connect your cards and it should boot up.
The drivers I am running are: 460.91.03
What I have found is the original LHR cards will run at reduced hash rate:~100MH on ERGO
If I drop the driver down to 460.39 then the cards will run at: ~120MH on ERGO
I have split my LHR cards across 2 rigs
Original LHR cards on driver 460.39
Updated LHR cards on driver 460.91.03
The cards I am using are all EVGA GeForce RTX 3060 XC GAMING 12GB Video Card [12G-P5-3657-KR]
Let me know how you go.
Took me some mucking around to get it working.
Dan.
Thanks for this. Helped me realize I needed to update drivers. Btw, your temps are insanely high. I can’t imagine the mem temps. How are they not thermal throttling?
im using driver 460.84
Picked up a Zotac 3060 White trying to find the sweet spot on the card for ergo.
so far it takes 10w less to get anywhere near the Gig cards i have which put out 116-119mh each.
ill report back with my findings
EDIT:
After 30 minutes at it… Here is the hashrate
Card: ZOTAC GAMING GEFORCE RTX 3060 AMP White Ed
OS: HIVE
HASHRATE: 116.7
SETTINGS: core -548 / mem 2600 / PL 107
I have a spreadsheet going for all my findings as i go.
If 3060 v2 try this
Core: -242
Memory: 2600
Pl: 102
This is the version 2 LHR of the card mining ERGO:
I have also found just setting the power limit to 100 and leaving the other settings at stock (zero) works good as well.
2 Likes
You can get pretty efficient mining in ERGO, using the nvidia-smi commands via the RUN COMMAND:
nvidia-smi -i 1 -lgc 1220
I made a video where I do it in Windows, but show work fine in HiveOS: https://youtu.be/yDbIE3XNs5Q
Ты лучший!
I was using -390 but on another post, a guy suggested -330 and I’m now running at 116 MH.
Hello,
which 2 coins are you mining? ERGO and ETH? Your values are beautiful. What program did you set these two miners with?
Thanks
If you want lower power consumption which means lower temps try these settings:
5x LHR version 1
1x LHR version 2
1 Like
power limit used?
I had them set at default 0.
are this work with rtx 3060 LHR v1 ?
What are you mining bro?
Yes all my 3060 are LHR v1
I’m mining Ergo
Dual mining?
Yes dual mining (ERGO/ZIL)